【24h】

The influence of oxide inclusions on the fluidity of Al-7 wt.%Si alloy

机译:氧化物夹杂物对Al-7 wt。%Si合金流动性的影响

获取原文
获取原文并翻译 | 示例
           

摘要

Recycling of aluminium alloys often increases the volume fraction of oxide inclusions and this may influence the castability of the material. In this study, the fluidity of three Al-7 wt.%Si alloys, namely a standard A356, A356 with 20% scrap addition, and A356 with 50% scrap addition, is reported. The scrap additions consist of contaminated alloy turning chips. Fluidity measurements were performed in an experimental fluidity test consisting of gravity casting of spirals in sand moulds with good reproducibility. The influence of oxide content and percentage of recycled material on the fluidity of the alloys were studied. The results show that recycled material increases the oxide content of the molten metal, which significantly decreases its fluidity. Comparisons between the fluidity measurements on 20 and 50% scrap additions, however, do not show significant differences.
机译:铝合金的回收通常会增加氧化物夹杂物的体积分数,这可能会影响材料的可铸造性。在这项研究中,报告了三种Al-7 wt。%Si合金的流动性,即标准A356,添加20%废料的A356和添加50%废料的A356。添加的废料包括被污染的合金车削屑。流动性测量是在实验流动性测试中进行的,该实验包括在砂型中以良好的重现性对螺旋进行重力铸造。研究了氧化物含量和再生材料百分比对合金流动性的影响。结果表明,回收材料增加了熔融金属的氧化物含量,这大大降低了其流动性。然而,在添加20%和50%的废料时,流动性测量结果之间的比较并未显示出显着差异。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号