首页> 外文期刊>Materialwissenschaft und Werkstofftechnik >Korrelation zwischen im Salzspruehtest sowie in makroskopischen und ortsaufgeloesten elektrochemischen Untersuchungen ermittelten Ergebnissen zur Beschreibung des Korrosionsverhaltens von plasmaanodisierten und PVD-beschichteten Magnesiumlegierungen
【24h】

Korrelation zwischen im Salzspruehtest sowie in makroskopischen und ortsaufgeloesten elektrochemischen Untersuchungen ermittelten Ergebnissen zur Beschreibung des Korrosionsverhaltens von plasmaanodisierten und PVD-beschichteten Magnesiumlegierungen

机译:盐雾试验结果与宏观和空间分辨电化学研究结果之间的相关性,以描述等离子阳极氧化和PVD涂层镁合金的腐蚀行为

获取原文
获取原文并翻译 | 示例
           

摘要

To determine the corrosion behaviour different test methods were applied to plasma anodised and Al_2O_3 coated specimens of the magnesium die cast alloy AZ91D and CrN hard coatings with optimised deposition parameters for magnesium alloys. For the salt spray test the coated specimens were pre-damaged with the scratch test (EN ISO 1071-3:2000) and the superiority of the plasma anodised and Al_2O_3 coated system was impressively confirmed. The investigation of the macroscopic electrochemical corrosion behaviour with current density potential curves (10 mm testing-diameters) does not allow any satisfactory description of the quality of the different surface treatments. Measurements with a microprobe (0,1 mm testing diameter) supply a suitable description of the electrochemical corrosion behaviour of PVD-coated magnesium alloys by comparing intact coating areas with specific coating defects produced by Vickers indentations. The results of the three testing methods are compared and brought into agreement with each other. It is shown that conventional macroscopic current density-potential measurements are not suitable to describe the corrosion behaviour of PVD-coated magnesium alloys.
机译:为了确定腐蚀行为,对镁压铸合金AZ91D和CrN硬质涂层的等离子阳极氧化和Al_2O_3涂层试样采用了镁合金优化沉积参数的不同测试方法。对于盐雾测试,已用划痕测试(EN ISO 1071-3:2000)对涂层的样品进行了预损坏,并且令人印象深刻的证实了等离子体阳极氧化和Al_2O_3涂层系统的优越性。用电流密度电位曲线(10毫米测试直径)对宏观电化学腐蚀行为进行研究并不能令人满意地描述不同表面处理的质量。通过比较完整的涂层面积和由维氏压痕产生的特定涂层缺陷,使用微探针(测试直径为0.1 mm)进行的测量可以很好地描述PVD涂层镁合金的电化学腐蚀行为。比较了三种测试方法的结果,并使结果彼此一致。结果表明,常规的宏观电流密度电势测量方法不适合描述PVD涂层镁合金的腐蚀行为。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号