首页> 外文期刊>Microwaves, Antennas & Propagation, IET >Unequal Wilkinson power divider with wide range of arbitrary power division based on recombinant technology
【24h】

Unequal Wilkinson power divider with wide range of arbitrary power division based on recombinant technology

机译:基于重组技术的具有广泛任意功率分配范围的不等威尔金森功率分配器

获取原文
获取原文并翻译 | 示例
           

摘要

An arbitrary ratio Wilkinson power divider with large power dividing ratio is analysed and demonstrated in this study. This kind of Wilkinson power divider is constructed by incorporating equal (or unequal) power divider cells, recombinant structures, extra low power branches and transformers for matching the circuits. The proposed structure is compatible with single-layer printed circuit board fabrication process. The structure is analysed in detail, while the formulas are given as design guidelines. Moreover, this method is extended to unequal power dividers based on three-way Wilkinson power divider with larger dividing ratio. To verify the proposed design approach, the prototypes of 5:1, 7:1 and 11:1 unequal power divider are optimised, fabricated and measured. The measured bandwidth of 20 dB return loss are about 10, 10 and 6%, respectively, while the isolations of the output ports are better than 20 dB. Good agreements can be observed between the simulated and measured results. The phase differences of output ports are within ±3° over 10% fractional bandwidth.
机译:本研究分析并演示了具有大功率分配比的任意比率的威尔金森功率分配器。这种Wilkinson功率分配器是通过合并相等(或不相等)的功率分配器单元,重组结构,超低功率分支和用于匹配电路的变压器而构建的。所提出的结构与单层印刷电路板制造工艺兼容。详细分析了结构,同时给出了公式作为设计指南。此外,该方法扩展到基于三路威尔金森功率分配器且分配比更大的不等功率分配器。为了验证建议的设计方法,对5:1、7:1和11:1不等功率分配器的原型进行了优化,制造和测量。测得的带宽为20 dB的回波损耗分别约为10%,10%和6%,而输出端口的隔离度则优于20 dB。在模拟结果和测量结果之间可以观察到良好的一致性。输出端口的相位差在10%的分数带宽内在±3°之内。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号