首页> 外文期刊>Microwaves, Antennas & Propagation, IET >Circularly polarised printed antenna miniaturised using complementary split-ring resonators and reactive pin loading
【24h】

Circularly polarised printed antenna miniaturised using complementary split-ring resonators and reactive pin loading

机译:使用互补开口环谐振器和无功引脚负载使圆极化印刷天线小型化

获取原文
获取原文并翻译 | 示例
           

摘要

A circularly polarised printed antenna, miniaturised by utilising a combination of complementary split-ring resonators (CSRR) and reactive pin loadings, is presented. This design technique is shown to reduce the electrical size of the antenna diameter by 44% at 2.4 GHz. The antenna prototype, when radiating a right-hand circularly polarised beam, displayed 4.1 dBic of broadside realised gain with 70% radiation efficiency. Specifically, it was demonstrated that the stand-alone CSRR loading resulted in a size reduction of 30%. The addition of reactive pins enhances this factor up to 44% without causing any observable degradation in antenna performance.
机译:提出了一种圆极化印刷天线,该天线通过利用互补开口环谐振器(CSRR)和无功引脚负载的组合而实现了小型化。该设计技术显示在2.4 GHz时可将天线直径的电气尺寸减小44%。天线原型辐射右旋圆极化波束时,显示出4.1 dBic的宽边实现增益,辐射效率为70%。具体而言,已证明独立CSRR加载导致尺寸减小了30%。增加电抗引脚可将此系数提高至44%,而不会引起天线性能的任何明显下降。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号