...
首页> 外文期刊>Optical engineering >High-sensitivity sucrose erbium-doped fiber ring laser sensor
【24h】

High-sensitivity sucrose erbium-doped fiber ring laser sensor

机译:高灵敏度蔗糖铒掺杂光纤环激光传感器

获取原文
获取原文并翻译 | 示例
           

摘要

We Investigate a high-sensitivity sucrose sensor based on a standard erbium-doped fiber ring laser incorporating a coreless fiber (CF). A single-mode-coreless-single mode (SCS) structure with a very low insertion loss has been constructed. The SCS fiber structure performed dual function as an intracavity fiber filter and/ or a sensing element. The gain medium (erbium-doped fiber) is pumped by a 975-nm wavelength fiber coupled diode laser. Laser emission around 1537 nm with -2 dBm peak output power is obtained when a CF in SCS structure has a diameter of 125 nm. The 3-dB line-width of the laser is <0.14 nm, which is beneficial to high precision sensing. The sucrose concentration varied from 0% to 60%, and the relationship between the lasing wavelength and the sucrose concentration exhibited linear behavior (R2 = 0.996), with sensitivity of 0.16 nm/% was obtained. To improve the measurement sensitivity, the CF is etched by hydrofluoric acid. The splice joint of etched CF with SMF is a taper, which improves its sensitivity to sucrose changes. An average sensitivity of 0.57 nm/% and a high signal-to-noise ratio of 50 dB make the proposed sensor suitable for potential applications.
机译:我们研究了一种基于标准铒掺杂光纤环激光的高灵敏度蔗糖传感器,包括无芯纤维(CF)。构造了具有非常低的插入损耗的单模 - 无核单模(SCS)结构。 SCS光纤结构执行双功能作为腔内光纤滤波器和/或传感元件。增益介质(掺铒光纤)由975nm波长光纤耦合二极管激光器泵送。当SCS结构中的CF直径为125nm时,获得了大约1537nm的激光发射,获得-2 dBm峰值输出功率。激光器的3-DB线宽<0.14nm,有利于高精度感测。蔗糖浓度因0%至60%而变化,并且激光波长与蔗糖浓度之间的关系表现出线性行为(R2 = 0.996),得到0.16nm /%的灵敏度。为了提高测量敏感性,通过氢氟酸蚀刻CF。用SMF蚀刻CF的接头是锥度,这提高了其对蔗糖变化的敏感性。平均灵敏度为0.57nm /%,高信噪比为50 dB,使得所提出的传感器适用于潜在的应用。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号