...
首页> 外文期刊>Power Electronics, IET >Improved 48-pulse static synchronous compensator for high-voltage applications
【24h】

Improved 48-pulse static synchronous compensator for high-voltage applications

机译:改进的48脉冲静态同步补偿器,适用于高压应用

获取原文
获取原文并翻译 | 示例
           

摘要

A modified three-level 48-pulse ±100±MVAr static synchronous compensator (STATCOM) employing four pairs of elementary six-pulse neutral-point diode-clamped gate turn-off thyristor-based voltage source converters with fundamental frequency switching modulation is realised using angle control methodology and pre-calculated dead angle (the duration in which converter-terminal voltage is clamped to zero) in d-q synchronous rotating frame. With a magnetics configuration designed for summing up of output voltages of four converter pairs and simultaneously stepping up of its voltage to the transmission level, and employing proportional and integral controllers in the control, the operating performance equivalent to 96-pulse STATCOM is achieved through optimising harmonics distortion. This compensator is modelled and its performance is simulated in MATLAB using SimPowerSystem toolbox for voltage regulation in transmission system. The obtained results show reasonably good characteristics of the compensator to control system dynamics under steady-state and dynamic system conditions.
机译:修改后的三电平48脉冲ƒ±100±ƒ±MVAr静态同步补偿器(STATCOM)采用四对基本的六脉冲中性点二极管钳位的栅极关断晶闸管dq同步旋转框架中,通过使用角度控制方法和预先计算的死角(转换器端子电压钳位为零的持续时间),实现了具有基本频率开关调制的基于电压的电压源转换器。通过设计用于将四个转换器对的输出电压相加并同时将其电压升压至传输电平的磁性配置,并在控制中采用比例和积分控制器,通过优化可实现相当于96脉冲STATCOM的运行性能谐波失真。对该补偿器进行建模,并使用MATLAB中的SimPowerSystem工具箱在传输系统中进行电压调节,以仿真其性能。所获得的结果显示出补偿器在稳态和动态系统条件下控制系统动态的合理良好特性。

著录项

  • 来源
    《Power Electronics, IET》 |2010年第3期|p.355-368|共14页
  • 作者

  • 作者单位
  • 收录信息
  • 原文格式 PDF
  • 正文语种 eng
  • 中图分类
  • 关键词

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号