...
首页> 外文期刊>精密工学会誌 >レーザ熱処理による切りくず処理性の改善に関する基礎的研究
【24h】

レーザ熱処理による切りくず処理性の改善に関する基礎的研究

机译:激光热处理改善芯片可控性的基础研究

获取原文
获取原文并翻译 | 示例
           

摘要

切削加工の高能率化をはかるために,切削速度の高速化,さらに生産設備はライン化され昼夜を問わず自動運転されている.連続切削である旋削加工では,自動運転の際,切りくず処理性が問題となることがある.切りくずが被削材に絡みつき仕上げ面を擦過することで表面品位を低下させる恐れや,切りくずの噛みこみにより工具の破損が引き起こされる危険性も考えられる.%This study deals with the trial for improvement of chip controllability in turning with selective laser heat treatment for workpiece. Selective heat treatment for carbon steel JIS S45C was carried out with Nd:YAG laser which could be transmitted through an optical fiber and shows higher absorption rate against carbon steels than CO_2 laser. In turning of these selective laser heat threatened carbon steel, the chip form changed regular curl from irregular curl and chip breakability was improved compared with non-laser treated carbon steel. Surface roughness was obviously smaller comparing with non-laser treated carbon steel. Especially in the case that the depth of cut was larger, the surface roughness was smaller. As for cutting force, the principal force was slightly smaller, but the thrust force and feed force were almost the same. The cutting temperature was slightly lower. The tool wear was almost same as that in the case of non-laser treated carbon steel.
机译:为了提高切削效率,提高了切削速度,生产设备日夜整齐排列并自动运行,在连续切削的车削中,在自动运转中进行切屑控制。性可能是个问题。切屑可能会与工作材料缠结并在精加工表面上摩擦,从而降低表面质量,并且切屑可能被卡住并损坏工具。 %本研究涉及通过对工件进行选择性激光热处理来改善车削中切屑可控性的试验。对碳钢进行选择性热处理的JIS S45C是用Nd:YAG激光进行的,该激光可以通过光纤传输并显示出更高的吸收率与非激光处理碳钢相比,在选择性激光热威胁碳钢的车削过程中,切屑形态从不规则卷曲变为规则卷曲,切屑断裂性得到改善,表面粗糙度明显减小。激光处理的碳素钢,特别是在切削深度较大的情况下,表面粗糙度较小。对于切削力,主力略小,但推力和进给力几乎相同。温度略低。工具磨损与未经激光处理的碳钢几乎相同。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号