Ultra-precision cutting of titanium alloys by using coated carbide bite

Heiji Yasui; Shigehiko Sakamoto; Masaki Kawada

首页> 外文期刊>精密工学会誌 >Ultra-precision cutting of titanium alloys by using coated carbide bite

【24h】

Ultra-precision cutting of titanium alloys by using coated carbide bite

机译：使用涂层硬质合金钻头进行钛合金的超精密切削

获取原文

获取原文并翻译 | 示例

掌桥外文数据库（机构版） >>

开具论文收录证明 >>

文献代查 >>

页面导航

摘要
著录项
相似文献
相关主题

摘要

This paper deals with the experimental investigation for the ultra-precision cutting of titanium alloys. Titanium alloys, which are well-known as difficult-to-cut materials, have excellent mechanical and chemical properties. In order to produce the value-added high quality components of titanium alloys, the productive cutting technique of high dimension accuracy with high smoothness surface has been strongly required. The cutting technique, however, has not progressed well because the surface roughness and product accuracy become over the necessary finished values in the extremely short cutting length due to rapid cutting tool wear.

机译：本文研究了钛合金超精密切削的实验研究。钛合金是众所周知的难切削材料，具有出色的机械和化学性能。为了生产高附加值的钛合金优质零件，强烈需要具有高尺寸精度和高光滑度表面的生产切削技术。然而，由于快速切削刀具的磨损，表面粗糙度和产品精度在极短的切削长度内超过了必要的最终加工值，因此切削技术的进展并不顺利。

著录项

来源
《精密工学会誌》 |2002年第7期|p.938-932|共5页
作者
Heiji Yasui; Shigehiko Sakamoto; Masaki Kawada;
展开▼
作者单位

展开▼
收录信息
原文格式 PDF
正文语种 jpn
中图分类机械制造工艺;仪器、仪表;
关键词
ultra-precision cutting; surface roughness; titanium alloy; diamond bite;

机译：超精密切割;表面粗糙度;钛合金钻石咬;

相似文献

外文文献
中文文献
专利

1. Performance evaluation of PVD TIALN coated carbide tools vis-a-vis uncoated carbide tool in turning of titanium alloy (Ti-6Al-4V) by simultaneous minimization of cutting energy, dimensional deviation and tool wear [J] . Choudhary Amit, Paul S. Machining Science and Technology . 2019,第1a3期

机译：PVD TiAln涂层碳化物工具的性能评价Vis-Vis通过切割能量，尺寸偏差和工具磨损的同时最小化转动钛合金（TI-6AL-4V）的未涂覆硬质合金工具
2. Effect of cutting speed on chip formation and wear mechanisms of coated carbide tools when ultra-high-speed face milling titanium alloy Ti-6Al-4V: [J] . Anhai Li, Jun Zhao, Guanming Hou Advances in Mechanical Engineering . 2017,第7期

机译：钛合金Ti-6Al-4V超高速端面铣削时切削速度对涂层硬质合金刀具切屑形成和磨损机理的影响：
3. Cutting force, tool life and surface integrity in milling of titanium alloy Ti-6Al-4V with coated carbide tools [J] . Polini Wilma, Turchetta Sandro Proceedings of the Institution of Mechanical Engineers, Part B. Journal of engineering manufacture . 2016,第4期

机译：使用涂层硬质合金刀具铣削钛合金Ti-6Al-4V时的切削力，刀具寿命和表面完整性
4. An Investigation on Chip Formation in Ultra-precision Cutting of Titanium Alloy with Coated-Cemented-Carbide Tool at Low Cutting Speed [C] . H. Yasui, A. Shinozaki International Conference of the European Society for Precision Engineering and Nanotechnology . 2007

机译：涂层硬质合金刀具低切削速度超精密切削钛合金时切屑形成的研究
5. Tool life and flank wear modeling of physical vapour deposited titanium aluminum nitride/titanium nitride multilayer coated carbide inserts when end milling 4340 steel under dry and semi-dry cutting conditions [D] . Chakraborty, Pinaki 2007

机译：在干式和半干式切削条件下端铣4340钢时，物理气相沉积的氮化钛铝/氮化钛多层涂层硬质合金刀片的刀具寿命和侧面磨损模型
6. Study of PVD AlCrN Coating for Reducing Carbide Cutting Tool Deterioration in the Machining of Titanium Alloys [O] . Natalia L. Cadena, Rodrigo Cue-Sampedro, Héctor R. Siller, 2013

机译：减少钛合金加工中硬质合金刀具退化的PVD AlCrN涂层的研究
7. Investigations into Cutting Forces and Surface Roughness in Micro Turning of Titanium Alloy Using Coated Carbide Tool [O] . Jagadesh T., Samuel G.L. 2014

机译：用涂层硬质合金工具对钛合金微车削的切削力和表面粗糙度的研究
8. Characterization of Hard Mono-Nitride and -Carbide Titanium and Zirconium Coatings on High Speed Steel Cutting Tool Inserts [R] . Fenske, G., Kaufherr, N., Albertson, C., 1986

机译：高速钢刀具刀片上硬质单氮化物和碳化物钛及锆涂层的表征

Ultra-precision cutting of titanium alloys by using coated carbide bite

摘要

著录项

相似文献

相关主题

期刊订阅