首页> 外文期刊>日本建築学会環境系論文集 >実在住宅における温水ヒートポンプ熱源を利用した潜熱蓄熱式床暖房システムの効果的な運転に関する研究: その1 システムの概要と実測による評価
【24h】

実在住宅における温水ヒートポンプ熱源を利用した潜熱蓄熱式床暖房システムの効果的な運転に関する研究: その1 システムの概要と実測による評価

机译:住宅中利用热水热泵热源的潜热蓄热式地板采暖系统的有效运行研究:第1部分:系统概述和实测评估

获取原文
获取原文并翻译 | 示例
           

摘要

本研究では、温水HPとPCM利用潜熱蓄熱式パネルを組み合わせた床暖房システムを考案し、2軒の木造戸建住宅において設計段階における検討および居住後のシステム評価を行なった。設計段階では、暖房負荷と熱源機の能力および床パネルの想定温度・PCM蓄熱容量について簡易な検討を行ない、仕様を決定した。%Nowadays, many heating system is adapted in Japanese houses, such as air-conditioner, floor heating system, panel heating system, and so on.rnIn these systems, the need of floor heating is increasing by residents selecting open-plan houses. But, there are a few studies on floor heating,rnusing heat pump, which uses less energy than other heating systems. We have been developing the floor heating system, using low temperaturernhot water and stocking heat energy in PCM, and keeping inner thermal environment stable in houses which are well-insulated and airtight. Wernhave been measuring and evaluating two houses using this system. In conclusion, both houses kept inner temperature stable between 17℃rnand 24℃ during heating period using floor heating in a short time every day. It is shown that making hot water in low temperature, using withrnair-conditioner, and operating low power at starting time of heating contribute to low energy consumption.
机译:在这项研究中,我们设计了一种地板采暖系统,该系统使用PCM将热水HP和潜热存储型面板结合在一起,并检查了两个木制独立式住宅的设计,并在居住后对其进行了评估。在设计阶段,通过简单检查加热负荷,热源单元的容量,假定的地板温度和PCM储热容量来确定规格。如今,日本的房屋中已经适应了许多供暖系统,例如空调,地板供暖系统,面板供暖系统等。在这些系统中,居民选择开放式房屋对地板供暖的需求正在增加。地板采暖,使用热泵比其他采暖系统能耗低的研究很少。我们一直在开发地板采暖系统,它使用低温热水并在PCM中存储热能,并保持室内的热环境稳定Wern一直在使用该系统测量和评估两座房屋。总而言之,两座房屋每天在短时间内通过地板采暖在加热期间使内部温度稳定在17℃和24℃之间。结果表明,在使用热水的情况下在低温下使用热水和在加热开始时以低功率运行有助于降低能耗。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号