...
首页> 外文期刊>日本建築学会環境系論文集 >戸建住宅の断熱改修における開口部サッシ部へのダイナミックインシュレーションの適用可能性検討
【24h】

戸建住宅の断熱改修における開口部サッシ部へのダイナミックインシュレーションの適用可能性検討

机译:动力隔热对独立式住宅隔热修复中开口窗扇的适用性检验

获取原文
获取原文并翻译 | 示例
           

摘要

In order to insulate buildings more efficiently, a lot of insulation methods have been proposed and successfully applied to the building envelope, including areas such as walls, windows and the others. However, it is also important to insulate the window frame efficiently because it usually exhibits the greatest heat loss. Authors purposed new dynamic insulation system at the window frames with an active ventilation function and a heat pump for heat recovery. This system is composed of three parts: window frames which use porous material for dynamic insulation, mechanical ventilation system, and heat recovery heat pump system. This paper describes a computational simulation study of the technical feasibility about the thermal insulation efficiency of porous material on the proposed system. First, the window frame was designed using a porous material such as the packed bed of particles (I.e. glass wool, mineral wool, aluminum particle, etc.). Then, to verify its thermal insulation efficiency, the temperature contribution of the window frame was evaluated using computer fluid dynamics with different coupled conditions, namely the indoor/outdoor pressure differences. In addition, to verify the condensation effect, the relative humidity in the porous material was calculated by outdoor condition such as air temperature, humidity ratio, indoor/outdoor pressure difference, and porosity dependence of insulation material. The calculated results show the thermal load was inversely proportional to the indoor/outdoor pressure differences. The condensation in the insulation material depends on the outdoor temperature, humidity ratio, and porosity.%本研究では,断熱改修の実用化を迎え,ダイナミックインシュレーションを住宅の開口部サッシ部分に適用した新たな住宅断熱改修システムを提案し,その断熱性能及びポーラス材内部の結露有無,事なる条件下においての熱負荷低減可能性について評価した。評価結果から以下の知見が得られ,提案したダイナミックインシュレーションを用い,開口部サッシ部を換気口として活用する住宅改修技術の適用可能性が非常に高いと考えられる。
机译:为了更有效地对建筑物进行隔热,已经提出了许多隔热方法并将其成功地应用于建筑物围护结构,包括墙壁,窗户等区域。但是,有效地将窗框隔热也是很重要的,因为窗框通常会表现出最大的热损失。作者在窗框处设计了一种新的动态隔热系统,该系统具有主动通风功能和热泵以回收热量。该系统由三部分组成:使用多孔材料进行动态隔热的窗框,机械通风系统和热回收热泵系统。本文描述了在所提出的系统上关于多孔材料的绝热效率的技术可行性的计算仿真研究。首先,窗框是使用多孔材料例如颗粒(即玻璃棉,矿棉,铝颗粒等)的填充床来设计的。然后,为了验证其隔热效率,使用具有不同耦合条件(即室内/室外压差)的计算机流体动力学评估了窗框的温度贡献。另外,为了验证凝结效果,根据室外条件如空气温度,湿度比,室内/室外压差和绝缘材料的孔隙率来计算多孔材料中的相对湿度。计算结果表明,热负荷与室内/室外压力差成反比。绝缘材料中的冷凝物取决于室外温度,湿度比和孔隙率。%価初步し,その断热性能及びポーラス材料内部の结露有无,事なる条件下においての热负荷低减引起について评価した。评価结果から以下の知见が得られ,因此したダサッシ部を换気口として活用する住宅改修技术の适用可能が非常に高いと考えられる。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号