首页> 外文期刊>Journal of natural fibers >Low-Stress Mechanical Properties of Cotton Fabric Treated with Titanium Dioxide-Catalyzed Wrinkle-Resistant Finishing
【24h】

Low-Stress Mechanical Properties of Cotton Fabric Treated with Titanium Dioxide-Catalyzed Wrinkle-Resistant Finishing

机译:二氧化钛催化抗皱整理剂处理棉织物的低应力力学性能

获取原文
获取原文并翻译 | 示例
           

摘要

There are five low-stress mechanical properties (tensile, shearing, bending, surface, and compression) that affect the fabric handle. Dimethyloldihydroxyethyleneurea (DMDHEU) is a conventional agent for imparting wrinkle-resistant properties to cotton fabric. DMDHEU-crosslinked fabrics provide excellent wrinkle recovery properties but may affect the fabric hand. In this study, fabrics treated for wrinkle resistance were assessed by the Kawabata Evaluation System for Fabric (KES-F), which objectively evaluates low-stress mechanical properties of textiles. Four curing temperatures, 110, 130, 150, and 170oC, were used in the wrinkle resistant finishing and effects of different concentrations of titanium dioxide (TiO2) used as co-catalyst were also studied. It was found that changes in curing temperature (from 110 to 170oC) have an obvious effect on tensile, shearing and bending properties. Surface and compression properties, however, did not show a significant variation. Moreover, the use of TiO2 particles in the treatment affected low-stress mechanical properties of fabrics to a certain extent, especially in compression properties, due to the increase in thickness.
机译:影响织物手感的五种低应力机械性能(拉伸,剪切,弯曲,表面和压缩)。二甲基oldihydroxyethylurea(DMDHEU)是赋予棉织物抗皱性能的常规试剂。 DMDHEU交联的织物具有出色的皱纹恢复性能,但可能会影响织物的手感。在这项研究中,用川羽织物评估系统(KES-F)评估了经过抗皱处理的织物,该系统客观地评估了纺织品的低应力机械性能。四种固化温度分别为110、130、150和170oC,用于抗皱整理,还研究了不同浓度的二氧化钛(TiO2)用作助催化剂的效果。发现固化温度的变化(从110到170oC)对拉伸,剪切和弯曲性能有明显的影响。然而,表面和压缩性能没有显示出明显的变化。而且,由于厚度的增加,在处理中使用TiO 2颗粒在一定程度上影响了织物的低应力机械性能,特别是压缩性能。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号