...
首页> 外文期刊>Review of Scientific Instruments >A Study of Adjustments of a Zinn‐Type Ion Source
【24h】

A Study of Adjustments of a Zinn‐Type Ion Source

机译:Zinn型离子源的调节研究

获取原文
获取原文并翻译 | 示例
           

摘要

The ion current from a Zinn‐type ion source has been determined for various values of three parameters of the source. These parameters are the diameters of the probe and plate holes and the spacing of the nose and plate. The ion current from the source was found to increase linearly with the diameter of the plate hole up to a certain value while above this value there was little further increase. The ion current likewise increased with probe hole diameter, but the increased gas flow prevented extensive increases in this parameter. A smaller gap between nose and plate gave the maximum ion current for a smaller current to the filament and therefore at a smaller power dissipation in the arc. Gas consumption was 10 cc per hour.
机译:已针对三种来源离子源的各种值确定了来自Zinn型离子源的离子流。这些参数是探针和板孔的直径以及鼻和板的间距。发现来自离子源的离子电流随着板孔直径的增加而线性增加,直至达到某个值,而超过该值则几乎没有进一步增加。离子电流同样随探针孔直径而增加,但是增加的气流阻止了该参数的大量增加。鼻部和极板之间的间隙越小,灯丝的电流越小,从而产生的离子电流越大,因此电弧中的功耗就越小。耗气量为每小时10 cc。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利