...
首页> 外文期刊>Science and Technology of Advanced Materials >In vitro corrosion behaviour of plasma nitrided Ti-6Al-7Nb orthopaedic alloy in Hanks solution
【24h】

In vitro corrosion behaviour of plasma nitrided Ti-6Al-7Nb orthopaedic alloy in Hanks solution

机译:等离子氮化Ti-6Al-7Nb骨科合金在汉克斯溶液中的体外腐蚀行为

获取原文
获取原文并翻译 | 示例
           

摘要

Titanium alloy (Ti-6Al-7Nb) used for orthopaedic applications was nitrided using a conventional dc plasma technique. Load-dependent microhardness measurements exhibit a hardness of 2087 H_v at 25 g load for the alloy nitrided at 900℃ for 8 h. Cyclic polarization measurement in Hanks solution show maximum corrosion rate and minimum area of repassivation for the alloy nitrided for 8 h at 900℃. Electrochemical impedance measurements show an increase in charge transfer resistance and decrease in double layer capacitance when compared to untreated alloy.
机译:使用常规的直流等离子体技术对用于整形外科的钛合金(Ti-6Al-7Nb)进行了氮化处理。载荷相关的显微硬度测量显示,在900℃下氮化8h的合金在25 g载荷下的硬度为2087 H_v。在Hanks溶液中进行的循环极化测量表明,在900℃氮化8 h的合金,其最大腐蚀速率和最小的钝化面积。与未经处理的合金相比,电化学阻抗测量显示出电荷转移电阻增加,双层电容减少。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号