...
首页> 外文期刊>IEEE Journal of Solid-State Circuits >Accurate dB-Linear Variable Gain Amplifier With Gain Error Compensation
【24h】

Accurate dB-Linear Variable Gain Amplifier With Gain Error Compensation

机译:具有增益误差补偿的精确dB线性可变增益放大器

获取原文
获取原文并翻译 | 示例
           

摘要

This paper describes use of a novel exponential approximation for designing dB-linear variable gain amplifiers (VGAs). The exponential function is accurately generated using a simple error-compensation technique. The dB-linear gain is controlled linearly by the gate voltage, resulting in a simple and robust VGA. The proposed dB-linear VGA fabricated in a 65-nm CMOS process achieves a total variable gain range of 76 dB and dB-linear range greater than 50 dB with ±0.5-dB gain error. Under a 1.2-V supply voltage, the current consumption of the VGA is 1.8 mA and that of the output buffer is 1.4 mA. The input-referred in-band noise density is 3.5 nV/√{Hz} and the in-band OIP3 is 11.5 dBm. Due to the very simple circuit topology, the total active area of the VGA and the output buffer is extremely small, 0.01 mm2.
机译:本文介绍了一种新颖的指数近似在设计dB线性可变增益放大器(VGA)时的用途。指数函数是使用简单的误差补偿技术准确生成的。 dB线性增益由栅极电压线性控制,从而产生了简单而稳定的VGA。拟议中的以65 nm CMOS工艺制造的dB线性VGA实现了76 dB的总可变增益范围和大于50 dB的dB线性范围,并具有±0.5 dB的增益误差。在1.2V电源电压下,VGA的电流消耗为1.8 mA,输出缓冲器的电流消耗为1.4 mA。输入参考带内噪声密度为3.5 nV /√{Hz},带内OIP3为11.5 dBm。由于电路拓扑非常简单,因此VGA和输出缓冲器的总有效面积非常小,仅为0.01 mm 2

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号