...
首页> 外文期刊>IEEE Journal of Solid-State Circuits >Constant-gm constant-slew-rate high-bandwidth low-voltage rail-to-rail CMOS input stage for VLSI cell libraries
【24h】

Constant-gm constant-slew-rate high-bandwidth low-voltage rail-to-rail CMOS input stage for VLSI cell libraries

机译:用于VLSI单元库的恒定gm恒定摆率高带宽低压轨到轨CMOS输入级

获取原文
获取原文并翻译 | 示例
           

摘要

This paper introduces a general-purpose low-voltage rail-to-rail input stage suitable for analog and mixed-signal applications. The proposed circuit provides, simultaneously, constant small-signal and large-signal behaviors over the entire input common-mode voltage range, while imposing no appreciable constraint for high-frequency operation. In addition, the accuracy of the circuit does not rely on any strict matching of the devices, unlike most of the traditional approaches based on complementary input pairs, which need to compensate for the difference in mobility between electrons and holes with the transistor aspect ratios. Also, the technique is compatible with deep submicrometer CMOS devices, where the familiar voltage-to-current square law in saturation is not completely satisfied. Based on the proposed input stage, a transconductor with rail-to-rail input common-mode range and an input/output rail-to-rail operational amplifier were developed. Both cells were designed to operate with a 3-V single supply and fabricated in standard 0.8-Μm CMOS technology. Experimental results are provided.
机译:本文介绍了适用于模拟和混合信号应用的通用低压轨到轨输入级。所提出的电路同时在整个输入共模电压范围内提供恒定的小信号和大信号特性,同时对高频操作没有明显的限制。另外,与大多数基于互补输入对的传统方法不同,电路的精度不依赖于设备的任何严格匹配,传统方法需要使用晶体管纵横比来补偿电子和空穴之间的迁移率差异。而且,该技术与深亚微米CMOS器件兼容,在这种器件中,不能完全满足熟悉的饱和电压-电流平方律。基于提出的输入级,开发了具有轨至轨输入共模范围的跨导器和输入/输出轨至轨运算放大器。这两款电池均设计为采用3V单电源供电,并采用标准的0.8μmCMOS技术制造。提供实验结果。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号