...
首页> 外文期刊>構造工学論文集 >単層円筒ラチスシェルの崩壊性状および耐震性能評価に関する研究
【24h】

単層円筒ラチスシェルの崩壊性状および耐震性能評価に関する研究

机译:单层圆柱格子壳的倒塌性能及抗震性能评估研究

获取原文
获取原文并翻译 | 示例
           

摘要

This present paper discusses on seismic response characteristics and collapse mechanism of cylindrical latticed shells, and proposes a method for evaluation of seismic performance of the latticed shells. The cross-section of each member in the latticed shell is proportioned to satisfy the required ultimate design load Based on the results of nonlinear dynamic response analysis, the critical value of seismic intensity and dynamic ductility index for the latticed shells are calculated depending on a prescribed critical deformation and the seismic performance is evaluated in terms of the critical deformation As its numerical parameters, a critical plastic rotation angle, a half open angle of member, and a safety factor of the latticed shells for dead and snow loads are reflected for the evaluation, and the effects on the dynamic ductility index of the parameters are investigated quantitatively.%本研究では部材半開角θ_0(=3°, 4°, 5°),部材細長比λ_0(=50, 60, 70)をパラメータとして,設計荷重に対して断面算定された円筒ラチスシェルの地震応答性状および崩壊性状を分析するとともに,部材の限界変形に注目した限界地震動強さ,動的耐震性能指標,動的靭性指標に基づき,当該構造物の耐震性能,靭性を分析した。得られた結論を以下に要約する。1)設計荷重(固定荷重+積雪荷重)に対する安全率v_s=l.7とし,既往の研究に基づき円筒ラチスシェル特有の座屈性状(全体座屈,個材座屈)を考慮して断面算定を行った。断面算定された円筒ラチスシェルに対して初期不整を考慮した弾塑性座屈荷解析を行ったところ,弾塑性座屈荷重は設計荷重の1.8〜2.5倍程度の安全率となることを確認した。
机译:本文探讨了圆柱状格子壳的地震反应特征和倒塌机理,并提出了一种评估格子壳抗震性能的方法。网格壳体中每个构件的横截面按比例分配以满足所需的最终设计载荷。根据非线性动力响应分析的结果,根据规定,计算出网格壳体的地震烈度和动态延性指数的临界值根据临界变形评估临界变形和抗震性能作为评估其数值参数,反映了临界塑性旋转角,构件的半张角以及格形壳体在静载荷和雪载荷下的安全系数,以进行评估%本研究では部材半开角θ_0(= 3°,4°,5°),部材可以比λ_0(= 50,60,70)进行定量研究。として,设计荷重に対して断面算定された円筒ラチスシェルの地震応答性状および崩壊性状を分析するとともに,部材の限界変形に注视した限界地震动强さ,动的耐震性能指标,动的指标指标に基づき, 1)设计荷重(固定荷重+积雪荷重)に対する安全率v_s = l.7とし,既往の研究に基づき円筒ラチスシェル特有の座屈性状(全体座屈,个材座屈)を考虑して断面算定を行った。行ったところ,弾塑料座屈荷重は设计荷重の1.8〜2.5倍程度の安全率となることを确认した。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号