開口を有する水平な鋼製下地吊り天井(面材:GB-Rt9.5,下地材:JIS規格材)を対象に、天井面の面内方向に圧縮載荷実験を行い、以下のような知見を得ることができた。1) 面内方向の耐力は、有効幅(試験体全幅に対して、開口を有さない部分の占める割合)が75%以上においては、10kN/mを超える値を示した。2) 面内方向の耐力は、有効幅が60%を下回ると、最大耐カも低下した。3) 破壊形態は、有効幅が高いと端部の損傷が支配的であった,有効幅率が下がると、開口の入隅部での破壊も見られた。4) 野緣受けの圧縮軸力は、計測位置において最大で2kN程度であった。軸力分布は、加力方向に対し非対称だった。5) せっこうボードの面内応力は、最大2.5N/mm~2程度であった。また、加力方向に対し概ね対称だった。開口の入隅部の応力が高い傾向があった。6) せっこうボードの曲げお力は、最大1.5N/mm~2程度であった。また、edge軸の両端部が高い分布傾向を示した。破壊箇所に近い計測点の応力が大きかった。7) 吊りボルトは、圧箱力を負担する傾向が見られた。また、開口端部では小さく、中央部が大きい傾向だった。%In recent years, suspended ceilings were often damaged by earthquakes. Investigations on seismic capacity of ceilings have been conducted The new standard for seismic design of suspended ceiling requires a certain clearance around those to prevent collision with surrounding walls. On the other hand suspended ceilings without clearance also have a certain seismic capacity. In this paper, in-plane compression mechanical propoties of steel furring suspended ceiling system with opening are clarified by static compression tests of middle scale specimen. The following results were obtained 1. The in-plance compression strength decreases proportionally to the ratio of opening in width direction. 2. Bucking of gypsum board is a major collapse mode. 3. Reinforcement at opening gives a certain stiffening effect.
展开▼