...
  • 主题
高级搜索  >
历史搜索 清空历史
首页> 外文期刊>Vlakna a Textil >EVALUATION OF END USE PROPERTIES OF KNITTED SCARVES IN THE EGYPTIAN MARKET
【24h】

EVALUATION OF END USE PROPERTIES OF KNITTED SCARVES IN THE EGYPTIAN MARKET

机译：埃及市场针织围巾的最终用途评价

获取原文
获取原文并翻译 | 示例
           
页面导航
  • 摘要
  • 著录项
  • 相似文献
  • 相关主题

摘要

In this study some mechanical and comfort properties of eleven cotton, viscose, cotton/Lycra, and viscose/Lycra single jersey knitted fabrics used as scarves in the Egyptian market were measured. Bursting strength, abrasion resistance, air permeability, thermal resistance, water vapour permeability and water permeability were measured. The relation between most of these properties and fabric constructional parameters was found. Regression equations were found to predict each of abrasion resistance, air permeability, and thermal resistance in terms of loop length and stitch density. While water vapour permeability was predicted in terms of fabric thickness and wales per centimeter. Loop length and stitch density are the key factors affecting the mechanical and comfort properties of single jersey knitted fabrics. The effect of percentage Lycra on the properties under study was investigated. An acceptable relation was found between Lycra percent and each of air permeability (R~2=0.65) and water vapour permeability (R~2=0.8). Increasing Lycra percent decreased both air permeability and water vapour permeability. Also a relation between Lycra percent and each of abrasion resistance and thermal resistance was found with (R~2=0.5) for both. Increasing Lycra percent increased both abrasion and thermal resistances. No relation was found between Lycra percent and bursting strength.
机译：在这项研究中，测量了11型棉，粘胶，棉/莱卡和粘胶/莱卡/ Lycra单泽的机械和舒适性，用于埃及市场的围巾。测量爆破强度，耐磨性，透气性，耐热性，水蒸气渗透性和水渗透性。找到了大多数属性和织物结构参数之间的关系。发现回归方程预测环长度和针密度方面的每个耐磨性，透气性和热阻。虽然在织物厚度和每厘米威尔士方面预测了水蒸气渗透性。循环长度和针脚密度是影响单泽西针织面料机械和舒适性的关键因素。研究了Lycra百分比对研究下的性质的影响。在Lycra百分比和透气性（R〜2 = 0.65）之间发现可接受的关系（R〜2 = 0.65）和水蒸气渗透率（R〜2 = 0.8）。提高Lycra％降低透气性和水蒸气渗透性。对于两者的（R〜2 = 0.5），还发现了Lycra百分比与每个耐磨性和热阻之间的关系。增加莱卡百分比增加了磨损和热阻。 Lycra百分比和爆破强度之间没有找到任何关系。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱：kefu@zhangqiaokeyan.com

京公网安备：11010802029741号 ICP备案号：京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有

  • 客服微信

  • 服务号