An installation in a Federal building tested the efficacy of a highly-controlled, workstation-specific lighting retrofit The study took place in 86 cubicles in an open office with low levels of daylight. A direct/indirect pendant luminaire with three 32 watt lamps, two DAU ballasts, and an occupancy sensor provided both task and ambient light for each cubicle. All three lamps turned on and off according to occupancy on a workstation-by-workstation basis. Field measurements taken over the course of several months demonstrated 40 percent lighting energy savings compared to a baseline that represents a typical Federal building retrofit; the baseline has a lighting power density of8.9W/m2 (OSSW/ft2) and no advanced controls. A photometric analysis found that the installation provided higher desktop light levels than the baseline did, while an occupant survey suggested that occupants preferred the lighting system to the baseline. Disclaimer: This document was prepared as an account of work sponsored by the United States Government While this document is believed to contain correct information, neither the United States Government nor any agency thereof, nor The Regents of the University of California, nor any of their employees, makes any warranty, express or implied, or assumes any legal responsibility for the accuracy, completeness, or usefulness of any information, apparatus, product, or process disclosed, or represents that its use would not infringe privately owned rights. Reference herein to any specific commercial product, process, or service by its trade name, trademark, manufacturer, or otherwise, does not necessarily constitute or imply its endorsement, recommendation, or favoring by the United States Government or any agency thereof, or The Regents of the University of California. The views and opinions of authors expressed herein do not necessarily state or reflect those of the United States Government or any agency thereof or The Regents of the University of California.
展开▼
