...
首页> 外文期刊>Journal of water reuse and desalination >Treatment of tannery wastewater for reuse by physico-chemical processes and a membrane bioreactor
【24h】

Treatment of tannery wastewater for reuse by physico-chemical processes and a membrane bioreactor

机译:用物理化学方法和膜生物反应器重用制革废水的鞣制废水

获取原文
获取原文并翻译 | 示例
           

摘要

Treatment of wastewater from a tannery in Greater Ho Chi Minh City (Vietnam) was investigated on a pilot scale. After pre-treatment by the tannery that included batch-coagulation and sedimentation, the wastewater was treated by dissolved air flotation, a membrane bioreactor (MBR) and granular activated carbon (GAC) for polishing the MBR effluent. The average removal efficiency for organic substances in the MBR was 81% while total nitrogen could only be removed by 36%. The performance of the GAC column could be successfully predicted using adsorption parameters determined in laboratory experiments. A larger proportion of the organics in the MBR effluent was only weakly adsorbable, therefore the usable carbon capacity was limited as confirmed by the modelling approach. The results were used to outline the size of a technical plant with a volumetric loading rate of 3 kg COD/(m(3)*d) for the MBR and a specific carbon demand of about 1.8 kg/m(3).
机译:试点规模研究了大胡志明市(越南)的制革中的废水。 在包括分批凝固和沉降的制革器预处理后,废水通过溶解的空气浮选,膜生物反应器(MBR)和粒状活性炭(GAC)处理,用于抛光MBR流出物。 MBR中有机物质的平均去除效率为81%,而总氮只能通过36%除去。 可以使用实验室实验中确定的吸附参数来成功预测GAC列的性能。 MBR流出物中的有机物比例较大仅是弱可吸收的,因此可用的碳容量受到建模方法证实的限制。 结果用于概述具有3kg COD /(m(3)* d)的体积加载速率的技术植物的大小,并且特定的碳需求为约1.8kg / m(3)。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号