首页> 外文期刊>Journal of Applied Polymer Science >Insight into water lubrication performance of polyetheretherketone
【24h】

Insight into water lubrication performance of polyetheretherketone

机译:洞察聚醚醚酮的水润滑性能

获取原文
获取原文并翻译 | 示例
           

摘要

Polyetheretherketone (PEEK) is a kind of polymer with excellent mechanical properties combined with good wear resistance and has been widely used in the engineering field. In order to explore the possibility for PEEK using as a water-lubricated bearing material, an in-depth study on the water lubrication performance of PEEK was conducted by using a series of experiments. The water lubrication performances combined with the lubricating mechanism were evaluated both by the friction coefficient and by the wear behavior of PEEK. The results indicated that PEEK was suitable for water-lubricated bearing productions. The water film could form effectively between the friction pairs under high sliding velocity, while the transfer film could form under low sliding velocity. Both the water film and the transfer film could improve the water lubrication performance for the friction pairs. Moreover, sliding velocities and contact pressures highly influence the water lubrication performance of PEEK. The increase in contact pressure or the decrease in sliding velocity would exacerbate the wear of material. The stick-slip phenomena also occurred on the specimens under low sliding velocity. The main purpose of this study is to provide an experimental basis for PEEK using as a water-lubricated bearing material.
机译:聚醚醚酮(PEEK)是一种具有优良机械性能和耐磨性的聚合物,在工程领域有着广泛的应用。为了探索聚醚醚酮作为水润滑轴承材料的可能性,通过一系列实验对聚醚醚酮的水润滑性能进行了深入研究。通过摩擦系数和PEEK的磨损性能,结合润滑机理对水润滑性能进行了评价。结果表明,PEEK适用于水润滑轴承的生产。在高滑动速度下摩擦副之间可以有效地形成水膜,而在低滑动速度下可以形成转移膜。水膜和转移膜都能改善摩擦副的水润滑性能。此外,滑动速度和接触压力对PEEK的水润滑性能有很大影响。接触压力的增加或滑动速度的降低会加剧材料的磨损。在低速滑动条件下,试样也出现了粘滑现象。本研究的主要目的是为PEEK用作水润滑轴承材料提供实验依据。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号