...
首页> 外文期刊>Steel Research >Optimizing Cold Rolling and Mode of Annealing of Interstitial-Free High-Strength Steel Sheets
【24h】

Optimizing Cold Rolling and Mode of Annealing of Interstitial-Free High-Strength Steel Sheets

机译:Optimizing Cold Rolling and Mode of Annealing of Interstitial-Free High-Strength Steel Sheets

获取原文
获取原文并翻译 | 示例
           

摘要

Percentage of cold rolling and mode of annealing significantly influence the formation of structures and textures of steel sheets. The objective is to co-relate the micro-structures and textures at each step of processing and their effect on mechanical properties. In addition, an attempt has been made to distinguish the batch and continuous mode of annealing. In the present investigation, interstitial free high strength (IF-HS) steel was first hot rolled to 85-90 percent , followed by cold rolling (CR) and then annealed. Annealing was carried out in the batch as well as the continuous mode. It was found that a fine pancake type and strong hot band texture was developed after hot rolling. Its very strong orientations were (332)[113] and (112)[110]. An almost uniform alpha-fibre and gamma-fibre were developed at 80 percent cold reduction. After annealing, the new y-fibre was found to be developed replacing the old one for both modes of annealing i.e. batch and continuous. Further, it was observed that the intensity of the y-fibre was higher at 80 percent CR after continuous annealing than after batch annealing. The strain energy introduced during cold rolling could not be removed completely in batch annealing. Therefore, the drawability obtained through continuous annealing was higher than that after batch annealing. The process route of 80 percent CR and annealing, either in batch or in continuous mode, has developed optimum strength and drawability in steel sheets. Either batch or continuous mode can be used for annealing to cold rolled IF-HS steel sheets, but the latter one is found to be superior to the former one.

著录项

获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号