Concept of a solid oxide electrolysis-molten carbonate fuel cell hybrid system to support a power-to-gas installation

Jarosiaw Milewski; Janusz Zdeb; Arkadiusz SzczesniakAliaksandr MartsinchykJakub KupeckiOlaf Dybinski

首页> 外文期刊>Energy conversion & management >Concept of a solid oxide electrolysis-molten carbonate fuel cell hybrid system to support a power-to-gas installation

【24h】

Concept of a solid oxide electrolysis-molten carbonate fuel cell hybrid system to support a power-to-gas installation

机译：Concept of a solid oxide electrolysis-molten carbonate fuel cell hybrid system to support a power-to-gas installation

获取原文

获取原文并翻译 | 示例

掌桥外文数据库（机构版） >>

开具论文收录证明 >>

文献代查 >>

页面导航

摘要
著录项
相关主题

摘要

This study outlines a concept for improving a power-to-gas (P2G) system through the implementation of highly efficient high-temperature electrolysis combined with a molten carbonate fuel cell (MCFC) as a CO_2 capture unit for a power plant. Laboratory scale experiments demonstrate that the MCFC could be used for CO_2 separation, opening the way to capture of CO_2 from flue gases at coal-fired power stations, while maintaining both high electric efficiency and a high CO_2 separation factor. Improved energy efficiency can be achieved by the lower electricity requirement of high temperature electrolysis compared to other technologies. Results obtained from experimental investigations show that a CO_2 separation rate in excess of 90 % is achievable through adjusting the cathode inlet flow. It should be noted that flue gas must be mixed with air before delivery to the MCFC. Controlled flow of inlet gases to the anode can raise electric efficiency to above 35 % for both laboratory-size and full-scale MCFC. The benefits of the concept are manifested by lower power consumption of the system and no energy penalty for the CO_2 capture process. Additionally, the system enjoys good thermal management because all devices run at elevated temperatures (Sabatier reactor at 300 ℃, MCFC at 650 ℃, solid oxide electrolyzer at 700-800 ℃). The proposed improvements increase the system's competitiveness relative to alternative P2G systems and reduce the price of substitute natural gas. Secondly, it will eliminate the consumption of heat from the host coal-fired power plant. Thirdly, the entire system will be more straightforward, compact, and modular, allowing any future scale-up to be implemented without technological difficulties. Finally, the amount of energy required to produce hydrogen will decline by around 25 %.

著录项

来源
《Energy conversion & management》 |2023年第1期|116582.1-116582.14|共14页
作者
Jarosiaw Milewski; Janusz Zdeb; Arkadiusz SzczesniakAliaksandr MartsinchykJakub KupeckiOlaf Dybinski;
展开▼
作者单位

Warsaw University of Technology, Faculty of Power and Aeronautical Engineering Institute of Heat Engineering, 21/25 Nowowiejska Street, 00-665 Warsaw, Poland;

TAURON Wytwarzanie S.A., Promienna 51, 43-603 Jaworzno, Poland;

Institute of Power Engineering, 01-330, Warsaw, Mory 8, Poland, Center for Hydrogen Technologies (CTH2), Institute of Power Engineering, Augustowka 36, 02-981 Warsaw, Poland, National Fuel Cell Research Center (NFCRC), University of California, Irvine, En;

展开▼
收录信息美国《科学引文索引》(SCI);美国《工程索引》(EI);
原文格式 PDF
正文语种英语
中图分类
关键词
Solid oxide fuel cells; Molten carbonate fuel cell; Power-to-gas; Synthetic fuels; CO_2 capturing;

Concept of a solid oxide electrolysis-molten carbonate fuel cell hybrid system to support a power-to-gas installation

摘要

著录项

相关主题

期刊订阅