...
  • 主题
高级搜索  >
历史搜索 清空历史
首页> 外文期刊>Ocean engineering >Accumulated displacement and unloading stiffness variations of modified suction caisson in sand under multidirectional lateral cyclic loading
【24h】

Accumulated displacement and unloading stiffness variations of modified suction caisson in sand under multidirectional lateral cyclic loading

机译：Accumulated displacement and unloading stiffness variations of modified suction caisson in sand under multidirectional lateral cyclic loading

获取原文
获取原文并翻译 | 示例
           
页面导航
  • 摘要
  • 著录项
  • 相关主题

摘要

The modified suction caisson (MSC) is an innovative foundation for offshore wind turbines. Model tests were conducted to study the bearing behavior of the regular suction caisson (RSC) and the MSC in sand under multidirectional lateral cyclic loads. Each test includes two stages: (a) the load was applied in the initial loading direction, and (b) the load was applied in the direction which rotate through a deflection angle from the initial loading direction. Results show that in the first stage, the translational motion direction of suction caisson in plane view coincides with the loading direction. In the second stage, the motion direction of the suction caisson doesn't coincide with the loading direction. This phenomenon becomes more obvious under low loading amplitude. When the deflection angle is less than 90 degrees, total accumulated displacement increases with increasing the load cycles. The maximum normalized total displacements for the RSC (zeta b = 0.833) and the MSC (zeta b = 0.649, 0.833) were obtained when the deflection angles equal 45 degrees, 45 degrees and 30 degrees. When the deflection angle value is higher than 90 degrees, the total displacement decreases with increasing the deflection angle. Changing the loading direction has little effect on the unloading stiffness values for both the RSC and the MSC.

著录项

获取原文

客服邮箱：kefu@zhangqiaokeyan.com

京公网安备：11010802029741号 ICP备案号：京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有

  • 客服微信

  • 服务号