In this paper, an optic-fiber temperature sensor is proposed with an innovative structure design and sensing theory combination. The structure design is consisted of classic SMSMS structure and a polydimethylsiloxane (PDMS) microcavity, which is formed by inserting single mode fibers (SMF) and multimode fibers (MMF) from both ends of a hollow core fiber (HCF) filled with uncured PDMS. By adjusting the length (L) of the cavity into proper value, the reflection temperature sensitivity reaches up to-567.86 pm/degrees C, and the transmission sensi-tivity reaches-120.69 pm/degrees C. Due to the presence of the PDMS microcavity, the reflection spectrum achieved highly sensitive temperature Fabry-Perot interferometer (FPI) sensor. Moreover, a Mach-Zehnder interferometer (MZI) temperature sensor also formed by monitoring the transmission spectrum, and its temperature sensitivity is elevated about 7 and 1.2 times compared with the pure splicing SMSMS and the splicing + PDMS coating structure. By deploying the PDMS microcavity, FPI sensor and MZI sensor were combined inside one device with significant temperature sensing performance, and these two combined sensors can cross-correct within the intersected detection range. With simple manufacture steps, higher temperature sensitivity and bigger sensing range are achieved.
展开▼
