...
  • 主题
高级搜索  >
历史搜索 清空历史
首页> 外文期刊>Landslides >Development of the surface displacement during repeated rainfalls in sandy model slopes: condition for the increase of the displacement to failure
【24h】

Development of the surface displacement during repeated rainfalls in sandy model slopes: condition for the increase of the displacement to failure

机译：Development of the surface displacement during repeated rainfalls in sandy model slopes: condition for the increase of the displacement to failure

获取原文
获取原文并翻译 | 示例
           
页面导航
  • 摘要
  • 著录项
  • 相关主题

摘要

It had been often reported that surface displacement showed an accelerating increase just prior to failure of a slope. Many methods for predicting failure time of a slope were proposed based on the modelling of the accelerating displacement just prior to failure. The mechanical condition which caused the accelerating displacement up to failure has been unclear until now. Measurement of 2-dimensional displacement was conducted on the model slopes under repeated rainfall, and measured data was analysed to examine the condition for accelerating surface displacement up to failure. Measured normal displacement varied with increasing surface displacement and did not converge to constant finally against the idea that the normal displacement approached to constant at steady state in direct shear condition on the slip surface parallel to the slope surface. It was supposed to be due to the difference in the direction of the slip surface to that of the slope surface. The angle alpha between the direction of slope surface and that of synthetic displacement on the surface, which synthesized the surface and normal displacements on the surface, was introduced to explain the variation of normal displacement with the increase of shear displacement on the slip surface in direct shear condition just prior to failure. The angle alpha varied at first with increasing surface displacement and converged to constant or quasi-constant just prior to failure on model slopes. It was recognized that the normal displacement converged to constant just prior to failure on the slip surface which was inclined against the slope surface. The angle alpha could be an indicator to judge whether the surface displacement increased significantly up to failure or not in the case that the slope failed under artificial rainfall.

著录项

获取原文

客服邮箱：kefu@zhangqiaokeyan.com

京公网安备：11010802029741号 ICP备案号：京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有

  • 客服微信

  • 服务号