...
首页> 外文期刊>Combustion and Flame >Combined experimental and numerical studies on soot characteristics of diesel sprays with split injection strategies
【24h】

Combined experimental and numerical studies on soot characteristics of diesel sprays with split injection strategies

机译:Combined experimental and numerical studies on soot characteristics of diesel sprays with split injection strategies

获取原文
获取原文并翻译 | 示例
           

摘要

? 2022 The Author(s)Experimental and numerical studies on the soot characteristics of Spray A flames were conducted with a focus on the effects of different split injection strategies in high-pressure high-temperature vessels within the engine combustion network. Three high-speed imaging techniques were used to obtain the transient information of flame evolution. Schlieren was applied to identify the spray boundaries and spray penetration. Moreover, a combined extinction and radiation technique was applied to quantify the spatial soot and temperature fields simultaneously. Finally, high-speed OH* chemiluminescence was applied at the baseline condition to measure the temporal high-temperature flame evolution. To substantiate the analysis, the experimental results were compared with the computational fluid dynamics (CFD) predictions from a Reynolds-averaged Navier Stokes approach with Unsteady Flamelet Progress Variable combustion and a two-equation soot-in-flamelet models, which qualitatively reproduced the experimental results. According to the chosen split injection strategy, dwell and first-injection pulse durations were varied. For all cases, the ignition delay (ID) and soot production of the second-injection pulse were shorter and higher than those of the first one, respectively. A slight change in the experimental soot production was observed when the dwell time was changed. The CFD calculations revealed a small reduction in the ID of the second pulse with long dwell times, which was due to variations in the interaction between the newly injected fuel and combustion recession. However, the effect of dwell variation was extremely small to produce significant differences in the evolution of the second pulse, neither in combustion nor in soot production. With regard to the duration of the first injection, no effect on the experimental soot production of the second pulse was observed despite noticeable differences due to the first pulse. The CFD results indicated that because of the quasi-steady flow and combustion process near the nozzle along the first injection, the evolution of the spray in the region close to the nozzle was identical in all first-pulse-duration cases, with differences only occurring at the tip of the first pulse jet. Thus, the second pulse evolution occurred under identical conditions for ignition and soot production. Although the sensitivity to both dwell and first-pulse durations was low, the CFD analysis highlighted the important effects of both end-of-injection wave propagation and combustion recession on the ignition and soot production of the second pulse.

著录项

获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号