...
  • 主题
高级搜索  >
历史搜索 清空历史
首页> 外文期刊>Engineering structures >A rapid evaluation method based on natural frequency for post-earthquake traffic capacity of small and medium span bridges
【24h】

A rapid evaluation method based on natural frequency for post-earthquake traffic capacity of small and medium span bridges

机译：A rapid evaluation method based on natural frequency for post-earthquake traffic capacity of small and medium span bridges

获取原文
获取原文并翻译 | 示例
           
页面导航
  • 摘要
  • 著录项
  • 相关主题

摘要

To improve the efficiency of evaluating the traffic capacity of bridges after the earthquake, a rapid method based on natural frequency for evaluating post-earthquake traffic capacity of small and medium-span bridges is pro-posed. Firstly, OpenSees software is selected to establish the seismic numerical analysis model of the pier, and the pressure of the main girder on the pier is equivalent to concentrated mass to extract the dynamic characteristics of the pier. The horizontal thrust on the pier top is adopted to simulate seismic action by the pseudo-static method, and the horizontal thrust is controlled by the maximum horizontal displacement. The value range of pier parameters is determined according to the definition of the regular bridge and relevant design data, then the design parameters and maximum horizontal displacement of each pier are sampled by the Latin hypercube sampling method to obtain various combined working conditions. Subsequently, the natural frequency, residual displacement and bearing capacity of the pier under different working conditions are obtained through nu-merical simulation. The relationship between natural frequency and residual bearing capacity of the pier after the earthquake is established in light of the simulation results of pier models. Then, the vehicle load is arranged on the basis of the most unfavorable loading principle, and the bearable maximum vehicle weight of the bridge is estimated from the bearing capacity of each pier, so that the traffic capacity of the bridge after the earthquake can be quickly evaluated by the change of natural frequency of piers. Finally, the reliability of the pier numerical model and residual displacement calculation method are verified by the test results of piers. The application process of the evaluation method proposed in this paper is illustrated by two typical examples of a simply supported beam bridge and a continuous beam bridge, which proves the feasibility of this method.

著录项

获取原文

客服邮箱：kefu@zhangqiaokeyan.com

京公网安备：11010802029741号 ICP备案号：京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有

  • 客服微信

  • 服务号