Influence of post-processing on the compressive behaviour of full-scale pultruded FRP columns: Holes and inserts

Alajarmeh Omar; Alhawamdeh Mohammad; Shelley TristanMohammed AliNicol LachlanSchubel PeterZeng Xuesen

首页> 外文期刊>Engineering structures >Influence of post-processing on the compressive behaviour of full-scale pultruded FRP columns: Holes and inserts

【24h】

Influence of post-processing on the compressive behaviour of full-scale pultruded FRP columns: Holes and inserts

机译：Influence of post-processing on the compressive behaviour of full-scale pultruded FRP columns: Holes and inserts

获取原文

获取原文并翻译 | 示例

掌桥外文数据库（机构版） >>

开具论文收录证明 >>

文献代查 >>

页面导航

摘要
著录项
相关主题

摘要

Pultruded Fibre Reinforced Polymer (PFRP) composite sections are being implemented extensively in many civil infrastructure applications due to their unique strength- and stiffness-to-weight ratio and non-corrosive nature. After production, PFRP sections are usually subjected to post-processing to enhance their versatility and structural integrity, including drilling holes and placing anti-crush inserts inside the hollow sections. This study investigates the influence of the drilled holes and the incorporated inserts on the compressive behaviour of PFRP sections. The effect of the quantity and diameter of the holes as well as the glued and unglued anti-crushed inserts inside the hollow part of the PFRP section was investigated experimentally. Finite element modelling was employed to simulate and validate the experimental behaviour of the PFRP columns under compressive loading. Digital Image Correlation (DIC) technique, using a high resolusion tracing camera, was utilised to capture the actual strain distribution at the outer surface of the PFRP sections to observe and correlate the impact of the holes and inserts with numerical solutions. Test results showed that the failure modes and load resistance capacity of PFRP columns were insensitive to the number of holes and the hole diameter due to the unique pullwinding manufacturing process, which results in continuous wound fibres around the perimeter. On the contrary, placing internal inserts prevented the occurrence of local buckling with slight enhancement in the axial load capacity. Moreover, delamination failure at the column corners was observed to occur prior to the local buckling and the final failure in the columns without and with inserts, respectively.

著录项

来源
《Engineering structures》 |2022年第1期|114547.1-114547.16|共16页
作者
Alajarmeh Omar; Alhawamdeh Mohammad; Shelley TristanMohammed AliNicol LachlanSchubel PeterZeng Xuesen;
展开▼
作者单位

Univ Southern Queensland;

Wagners Composite Fibre Technol;

展开▼
收录信息美国《科学引文索引》(SCI);美国《工程索引》(EI);
原文格式 PDF
正文语种英语
中图分类
关键词
Compressive strength; Buckling; Delamination; DIC; FEM; Pultruded composite; Post-processing; Hole;

Influence of post-processing on the compressive behaviour of full-scale pultruded FRP columns: Holes and inserts

摘要

著录项

相关主题

期刊订阅