...
  • 主题
高级搜索  >
历史搜索 清空历史
首页> 外文期刊>Journal of manufacturing processes >A novel multi-step strategy of single point incremental forming for high wall angle shape
【24h】

A novel multi-step strategy of single point incremental forming for high wall angle shape

机译：A novel multi-step strategy of single point incremental forming for high wall angle shape

获取原文
获取原文并翻译 | 示例
   

获取外文期刊封面封底 >>

       
页面导航
  • 摘要
  • 著录项
  • 相关主题

摘要

Single point incremental forming (SPIF) is a die-less manufacturing technology using a numerical controlling system for complex and customized parts. However, single-step SPIF cannot achieve high wall angle shapes due to the formability limit of the material. As wall angle gets larger, local thinning becomes severe, and cracking occurs easily. Generally, a multi-step strategy is used to get a hard-to-form deep drawing shape. However, inappropriate multi-step strategies can cause a stepped feature (corrugation). In this study, a novel parameterized multi-step strategy is proposed to solve the local thinning and stepped feature issues of forming high wall angle shape. Both experimental and simulation results showed this strategy not only improves the formability of a high wall angle, by avoiding over-thinning in the local region and redistributing the thickness of the material, but also minimizes geometric deviation by stepped feature. The multi-step strategy made the local thickness increase from 0.47 mm to 0.68 mm, preventing both cracking observed in a single-step strategy and the occurrence of the stepped feature. With the good agreement between experimental and simulation results, simulations with different parameters in a parameterized multi-step strategy were carried out to compare thickness distribution at each step, the stepped feature at the bottom and the ductile failure tendency. The comparison reveals that the locally large plastic strain, which was caused by the mismatch between the tool radius and vertical displacement, is the main reason for uneven thickness distribution, obvious stepped feature, and high failure tendency. With appropriate parameters, a multi-step strategy results in a more uniform thickness distribution, higher geometric accuracy, and lower failure tendency.

著录项

获取原文

客服邮箱：kefu@zhangqiaokeyan.com

京公网安备：11010802029741号 ICP备案号：京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有

  • 客服微信

  • 服务号