...
  • 主题
高级搜索  >
历史搜索 清空历史
首页> 外文期刊>Journal of manufacturing processes >Residual stress analysis and measurement in multi-layer bellows
【24h】

Residual stress analysis and measurement in multi-layer bellows

机译：Residual stress analysis and measurement in multi-layer bellows

获取原文
获取原文并翻译 | 示例
           
页面导航
  • 摘要
  • 著录项
  • 相关主题

摘要

Because large plastic deformation occurs in hydroforming bellows there is a residual stress distributing in the metal after forming, which is complex and not easy to be measured. The existence of residual stress might have an effect on the corrosive property and bulking performance of bellows. A finite element model was established to simulate the forming residual stress of the nickel alloy multi-layer bellow. The distribution of residual stress was calculated out and validated by cos alpha X-ray diffraction measurement. Thus the forming mechanics and the effects of layer number and forming pressure on the residual stress in the hydroforming bellow were both discussed in detail based on the established model. It was shown that the calculated residual stress had the same trend with the experimental results. The axial and circumferential residual stresses at the outer surface of the peak were both compressive. There existed the maximal Von Mises stress at the inner surface of the peak of the bellow. At this position the radial and axial residual stresses were both tensile. When applying multi-layer bellows and less forming pressure a lower forming residual stress could be obtained because of the narrow plastic strain region during forming.

著录项

获取原文

客服邮箱：kefu@zhangqiaokeyan.com

京公网安备：11010802029741号 ICP备案号：京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有

  • 客服微信

  • 服务号