首页> 外文期刊>Optical fiber technology >3.3 kW narrow linewidth FBG-based MOPA configuration fiber laser with near-diffraction-limited beam quality
【24h】

3.3 kW narrow linewidth FBG-based MOPA configuration fiber laser with near-diffraction-limited beam quality

机译:3.3 kW narrow linewidth FBG-based MOPA configuration fiber laser with near-diffraction-limited beam quality

获取原文
获取原文并翻译 | 示例
           

摘要

This paper demonstrates a narrow-linewidth fiber laser with near-diffraction-limited beam quality and high Raman suppression ratio by utilizing Master Oscillator Power-Amplifier structure based on narrow-bandwidth fiber Bragg gratings. The output power reaches 3.31 kW with a slope efficiency of 85.0 . At the maximum output power, the 3 dB, 10 dB, and 20 dB linewidths are 0.40 nm, 1.20 nm, and 3.09 nm, respectively. The beam quality M-2 factor is 1.32 and the Raman suppression ratio reaches 26.3 dB. A pair of narrow-bandwidth fiber gratings were used in the oscillator to compress the linewidth of the seed laser. We used backward-pumping configuration and plum-coiled gain fiber in the amplification stage to suppress the Raman effect and select transverse mode by fiber-bending. Finally, a compact all-fiber laser was obtained with narrow-linewidth, high beam quality, and effective suppression of the Raman effect. To the best of our knowledge, this is the highest output power for a sub-nanometer-linewidth laser using narrow-bandwidth fiber gratings and none-wavelength-locked laser diodes, which achieves near-diffraction-limit beam quality. This provides a solution for high-power narrow-linewidth laser sources with high beam quality.

著录项

获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号