Fracture Analysis of a 3D-Printed ABS Specimen: Effects of Raster Angle and Layer Orientation

A. Nabavi-Kivi; M. R. Ayatollahi; S. SchmauderM. R. Khosravani

首页> 外文期刊>Physical mesomechanics >Fracture Analysis of a 3D-Printed ABS Specimen: Effects of Raster Angle and Layer Orientation

【24h】

Fracture Analysis of a 3D-Printed ABS Specimen: Effects of Raster Angle and Layer Orientation

机译：Fracture Analysis of a 3D-Printed ABS Specimen: Effects of Raster Angle and Layer Orientation

获取原文

获取原文并翻译 | 示例

掌桥外文数据库（机构版） >>

开具论文收录证明 >>

文献代查 >>

页面导航

摘要
著录项
相关主题

摘要

Abstract Understanding the mechanical response of polymer components fabricated by fused deposition modeling (FDM) is an important issue. Therefore, the present study deals with the effects of raster angle and layer orientation on the tensile properties and fracture toughness of acrylonitrile butadiene styrene (ABS) specimens produced by the FDM method. Two groups of specimens are considered. The first group includes specimens with the same layer orientation and the four different raster angles 0°/90°, 15°/–75°, 30°/–60°, and 45°/–45°. Specimens in the second group have the fixed raster angle 45°/–45° and three different layer orientations. Tensile tests are performed using dumbbell specimens, and semicircular bending (SCB) specimens were used for fracture mechanics tests. The critical value of J-integral obtained from finite element simulations is used as a parameter to characterize fracture properties. In the first group of specimens, the critical value of J-integral for the 45°/–45° specimen is 4389 J/m2 while it is about 1880 J/m2 for the 0°/90° specimen. In the second group, the vertically printed specimens have the least fracture resistance 1004 J/m2, while this value reaches 5934 J/m2 for the specimens in which the precrack is perpendicular to the printed layers. In addition, the fracture surface of tensile specimens is analyzed using scanning electron microscopy for the mesomechanical study of failure in the printed specimens. Lastly, the crack path in SCB specimens is explored experimentally to understand how the raster angle and layer orientation affect the fracture trajectory and to justify different values of fracture loads.

著录项

来源
《Physical mesomechanics》 |2023年第1期|19-32|共14页
作者
A. Nabavi-Kivi; M. R. Ayatollahi; S. SchmauderM. R. Khosravani;
展开▼
作者单位

Fatigue and Fracture Research Laboratory, Center of Excellence in Experimental Solid Mechanics and Dynamics, School of Mechanical Engineering, Iran University of Science and Technology, Narmak;

Institute for Materials Testing, Materials Science and Strength of Materials (IMWF), University of Stuttgart;

Chair of Product Development, University of Siegen;

展开▼
收录信息
原文格式 PDF
正文语种英语
中图分类
关键词
fused deposition modeling (FDM); acrylonitrile butadiene styrene (ABS); fracture toughness; tensile properties;

Fracture Analysis of a 3D-Printed ABS Specimen: Effects of Raster Angle and Layer Orientation

摘要

著录项

相关主题

期刊订阅