• 主题
高级搜索  >
历史搜索 清空历史
首页> 外文期刊>Journal of Applied Polymer Science >Electrically conductive nanocomposites based on poly(lactic acid)/flexible copolyester blends with multiwalled carbon nanotubes
【24h】

Electrically conductive nanocomposites based on poly(lactic acid)/flexible copolyester blends with multiwalled carbon nanotubes

机译：Electrically conductive nanocomposites based on poly(lactic acid)/flexible copolyester blends with multiwalled carbon nanotubes

获取原文
获取原文并翻译 | 示例
           
页面导航
  • 摘要
  • 著录项
  • 相关主题

摘要

Abstract Nanocomposites of poly(lactic acid) (PLA)/poly(butylene adipate‐co‐terephthalate) (PBAT) blends with multiwalled carbon nanotubes (MWCNTs) were prepared and their morphology, as well as electrical, mechanical, and thermal properties were investigated. The motivation of this work is to prepare electrically conductive and environmentally benign polymer nanocomposites using biodegradable PLA/PBAT blends. The composites were characterized by Fourier transform infrared (FTIR) spectroscopy, scanning and transmission electron microscopy, tensile and microindentation tests, and thermogravimetric analyses (TGA). Volume resistivity and resistance to tensile deformation were measured for electrical characterization. The nanocomposites films were integrated into an electrical circuit to confirm their electrical conductivity. The FTIR spectra revealed the physical mixing between the polymer matrix and the filler. TEM micrographs suggested selective localization of MWCNTs in the PBAT phase with partial agglomeration forming a co‐continuous morphology. TGA and derivative thermogravimetric curves suggested the overall decreasing thermal stability of composites than pure polymer blends regardless of the effects on individual blend components. A relatively low electrical percolation threshold (around 1 wt of the fillers) compared to the literature works was achieved. Increasing electrical resistance of nanocomposites upon tensile deformation suggested their possibility of piezoresistive properties. Furthermore, the overall mechanical performance (i.e., elastic modulus, tensile strength, and hardness) of the materials was found to improve with increasing filler content.

著录项

获取原文

客服邮箱：kefu@zhangqiaokeyan.com

京公网安备：11010802029741号 ICP备案号：京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有

  • 客服微信

  • 服务号