Decontamination of contaminant-laden surfactant solutions is critical to successful implementation of surfactant-enhanced aquifer remediation (SEAR). Solvent extraction was studied for removing micellar-solubilized contaminants having low equivalent alkyl carbon numbers (EACNs) from surfactant solutions. Factors influencing the solvent extraction of micellar-solubilized contaminant were studied, including surfactant concentration, solution salinity, solvent solubilization, and solvent/solution volumetric ratio. A model was developed to quantify the impacts of these factors on contaminant removal. The good agreement between experimental results and model predictions corroborates assumptions made in the model development. From these results, it is concluded that extracting solvents must have much higher EACNs than that of the contaminant to reduce the micellar solubilization of the solvents, which can significantly reduce contaminant removal efficiency. However, the highest EACN solvent is not necessarily the best one for contaminant removal due to other constraints (e.g., molecular weight and viscosity). Increasing the total surfactant concentration or salinity of an anionic surfactant solution increases its contaminant solubilization capacity but reduces the contaminant removal efficiency by solvent extraction. Continuous column extraction operated at a low column surface loading rate allowed contaminant partitioning to approach equilibrium conditions, and multistage column extraction was able to improve the contaminant removal efficiency while minimizing solvent requirement.
展开▼
