首页>
外文期刊>journal of applied polymer science
>Compatibility of poly(ϵ‐caprolactone) (PCL) and poly(styrene‐co‐acrylonitrile) (SAN) blends. I. Blends containing SAN with 24 wt acrylonitrile
【24h】
Compatibility of poly(ϵ‐caprolactone) (PCL) and poly(styrene‐co‐acrylonitrile) (SAN) blends. I. Blends containing SAN with 24 wt acrylonitrile
展开▼
机译：Compatibility of poly(ϵ‐caprolactone) (PCL) and poly(styrene‐co‐acrylonitrile) (SAN) blends. I. Blends containing SAN with 24 wt acrylonitrile
AbstractPolymer blends of poly(ϵ‐caprolactone) (PCL) and poly(styrene‐co‐acrylonitrile) (SAN), containing 24 wt acrylonitrile (AN), were prepared, and their transition behavior was examined by thermal analysis and dynamic mechanical testing. The blends were judged to be compatible on the basis of the presence of a single, compositionally dependent glass transition. The results of thermal treatment upon blends glass transition behavior and the dependence of thermal history upon the crystallization of semicrystalline PCL were also studied. The crystallization of PCL from SAN/PCL blends was found to be retarded by the presence of SAN, and crystalline PCL was found to exist only in blends containing a high PCL concentration. Blends which do not contain crystalline PCL were transparent, and their glass transition behavior can be correlated by the Gordon–Taylor equation. Phase separation, which was characterized by lower critical solution temperature (LCST) behavior, was found to occur when blends were heated to elevated temp
展开▼
