AbstractA series of polyether–polyimides based on polycondensation of poly(tetramethylene oxide) glycol di‐p‐aminobenzoate with different molecular weights (650, 1000, 2000) and benzenetetracarboxylic acid dianhydride (BTDA) or 3,3′,4,4′‐benzenetetracarboxylic acid anhydride (BPTDA) was synthesized. Infrared spectroscopy (IR), differential scanning calorimetry (DSC), dynamic mechanical analysis (DMA), and stress–strain tests were used to follow the imidization process and to study the structure–property relations of this family of polymers. FTIR data showed that the imidization was completed after 6 h at 140°C, which is a much lower temperature than that required for polyimides synthesized from low molecular weight diamines. DSC and DMA results indicated that the block copolymer exhibited a well‐phase‐separated structure and had a broad rubbery plateau from about −70°C to 260°C, which varied with dianhydride type and hard‐segment content. The BTDA series had enhanced mechanical properties compared to the BPTDA series. The excellent tensile properties of the polyether–polyimides suggest that they could be potentially used as heat‐resi
展开▼
