AbstractA large number of parameters affect the inelastic response of an eccentric system. The centre of resistance no longer remains constant due to continuous loading and unloading of various elements of the system in and out of the inelastic region. The objective of this study is to develop the concept of strength eccentricity for asymmetrical structures excited well into the inelastic region in the event of a severe earthquake. A single mass monosymmetric three‐element system is selected. The torsional flexibility parameter is varied so as to obtain nine eccentric configurations covering the entire spectrum of such systems. These models were subjected to S00E component of the El Centro earthquake of 1940 which is considered to be a very severe earthquake. The concept of effective strength eccentricity is introduced which is defined as strength eccentricity at the point of intersection of ductility ratio curves of REE and FEE. It is proposed to provide additional strength in the elements of a torsionally unbalanced system independent of the design eccentricity. Empirical equations are proposed to account for design eccentricity and additional strength as well as distribution of the design strength. The proposed formulation is compared with the torsional provisions of UBC 1991, NBCC 1990 and NZC 1992. It is concluded that additional ductility demand on the REE and FEE designed based on the proposed formulation is almost nil as compared to that given by the three codes. The NZC and UBC require maximum ductility on the REE. The increase in overall strength of the system is least for the proposed formulation as compared to that given by the three codes. NBCC consistently requires the maximum total strength rati
展开▼
