• 主题
高级搜索  >
历史搜索 清空历史
首页> 外文期刊>Journal of Applied Polymer Science >Comparisons of the rheological behaviors of polypropylene and polymethyl methacrylate in a capillary die
【24h】

Comparisons of the rheological behaviors of polypropylene and polymethyl methacrylate in a capillary die

机译：Comparisons of the rheological behaviors of polypropylene and polymethyl methacrylate in a capillary die

获取原文
获取原文并翻译 | 示例
           
页面导航
  • 摘要
  • 著录项
  • 相关主题

摘要

In this study, the rheological characteristics of polypropylene (PP) melt at 210, 220, and 230 degrees C and polymethyl methacrylate (PMMA) melt at 230, 240, and 250 degrees C in a micro die were investigated. The experiments were performed over a shear rate range of 3 x 10(2) to 5 x 10(3) s(-1) using an advanced twin-bore capillary rheometer. Dies with diameters of 1.0, 0.5, and 0.25 mm were used. The results indicated that the geometric dependences of the PP and PMMA viscosities were not identical at different shear rates and temperatures and that the micro size effect had a profound influence on the PP viscosity. The analysis demonstrated that the variations in the shear viscosity of the PP and PMMA melts in the micro die were partially attributed to the contribution of the pressure applied to the polymer melts. Additionally, the effect of wall slip on the PP and PMMA viscosities in the tested dies was investigated based on the modified Mooney method. The results implied that wall slip easily occurred in the PP melt flowing through the 0.25 mm die at 210 degrees C due to the distinct size effect. (C) 2016 Wiley Periodicals, Inc.

著录项

获取原文

客服邮箱：kefu@zhangqiaokeyan.com

京公网安备：11010802029741号 ICP备案号：京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有

  • 客服微信

  • 服务号