Development of Roundness Measurement System by Optical V-block Method (2nd Report)

Atsuya YOKOTA; Ryuichi YAMADA; Kazuhisa YANAGI

首页> 外文期刊>精密工学会誌 >Development of Roundness Measurement System by Optical V-block Method (2nd Report)

【24h】

Development of Roundness Measurement System by Optical V-block Method (2nd Report)

机译：

获取原文

获取原文并翻译 | 示例

掌桥外文数据库（机构版） >>

开具论文收录证明 >>

文献代查 >>

页面导航

摘要
著录项
相似文献
相关主题

摘要

Following the measurement principle and algorithm described in 1st report, an experimental measurement system for aluminum hollow cylinder was presented. Firstly the measuring range and resolution of the optical unit were demonstrated. Then the roundness profiles for the sample cylinders were derived by utilizing correction factors for the intended band of undulation per revolution. The measured results by the developed system were in good agreement with those by commercial measuring instruments. It was concluded that the rotational error as well as roundness error of cylindrical machine parts could be successfully measured by the developed system. This system is applicable to the roundness measurement at workshop level.

著录项

来源
《精密工学会誌》 |2001年第3期|483-487|共5页
作者
Atsuya YOKOTA; Ryuichi YAMADA; Kazuhisa YANAGI;
展开▼
作者单位

展开▼
收录信息
原文格式 PDF
正文语种日语
中图分类机械制造工艺;仪器、仪表;
关键词
optical measurement; roundness profile; three-point measurement; V-block method;

相似文献

外文文献
中文文献
专利

1. Development of creep damage evaluation method for Cr-Mo-V steel forgings: 2nd report, evaluation of grain-boundary damage for creep and creep-fatigue situations [J] . Takeshi Ikuno, Kenichi Tanaka, Mikio Uematsu 日本機械学会論文集, A編 . 2002,第670期

机译：Development of creep damage evaluation method for Cr-Mo-V steel forgings: 2nd report, evaluation of grain-boundary damage for creep and creep-fatigue situations
2. Development of an optical measurement system for surface depth measurements and study of focus effect on determination of steel inclusion content by EN-10247 [J] . Goksel Durkaya, Huseyin Kurtuldu, Baris CetinBurak Bal Optical Engineering . 2021,第10期

机译：Development of an optical measurement system for surface depth measurements and study of focus effect on determination of steel inclusion content by EN-10247
3. Development of a reconstruction quality metric for optical three-dimensional measurement systems in use for hot-state measurement object [J] . Optical Engineering . 2020,第6期

机译：Development of a reconstruction quality metric for optical three-dimensional measurement systems in use for hot-state measurement object
4. Development of the Method for the Appropriate Selection of the Successor by Applying Metadata to the Standardization Reports and Members [C] . Isaac Okada, Minoru Saito, Yoshiaki Oida, Joint International Semantic Technology Conference . 2013

机译：Development of the Method for the Appropriate Selection of the Successor by Applying Metadata to the Standardization Reports and Members
5. Novel method for quantifying the cell size of marine phytoplankton based on optical measurements [O] . Lin, JF, Cao, WX, Zhou, W, 2014

机译：Novel method for quantifying the cell size of marine phytoplankton based on optical measurements
6. Ada Compiler Validation Summary Report: Certificate Number 890911W1.10135 Tolerant Systems, Inc., Tolerant Ada Development System, Version 2-3 Tolerant Eternity. [R] . 1989

机译：ada编译器验证摘要报告：证书编号890911W1.10135 Tolerant systems，Inc.，Tolerant ada Development system，版本2-3 Tolerant Eternity。

Development of Roundness Measurement System by Optical V-block Method (2nd Report)

摘要

著录项

相似文献

相关主题

期刊订阅