• 主题
高级搜索  >
历史搜索 清空历史
首页> 美国政府科技报告 >Investigation of Lift Bonding for Roller-Compacted Concrete with Low Normal Loads at Variable Placement Times.
【24h】

Investigation of Lift Bonding for Roller-Compacted Concrete with Low Normal Loads at Variable Placement Times.

机译：作者：张莹莹，山西建筑sHaNXI aRCHITECTURE 2008年第12期可变浇筑时低负荷碾压混凝土提升粘结性能研究。

获取原文
页面导航
  • 摘要
  • 著录项
  • 相似文献
  • 相关主题

摘要

A problem arises when roller-compacted concrete (RCC) is placed in lifts where the normal loads at the lift-joint interface are relatively low. A study was conducted to investigate the effects of lapses of time between lifts on shear, tensile, and bond strengths of an RCC structure. Three test sections were constructed, each including two 6-in.-thick lifts, with the second lift placed at either 4, 13, or 24 hr after the first lift was finished. Results of the study showed that if the second lift is placed within four hours of the first, the overall strength of the joint bond is increased. If the second lift is placed within 13 hr of the first, the strength of the joint bond varies between increased and decreased strength throughout the surface area of the joint indicating signs of differential set times over the surface of the first lift. When the second lift is placed after 24 hr, the overall strength of the bond is decreased. These findings resulted from the execution of four different shear tests on each test section, where each shear test uniquely quantified the bond strength of the joint interface. The most adequate test method to quantify the shear strength of the bond was found to be the procedure in ASTM D 5607-08.

著录项

相似文献

  • 外文文献
  • 专利
获取原文

客服邮箱：kefu@zhangqiaokeyan.com

京公网安备：11010802029741号 ICP备案号：京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有

  • 客服微信

  • 服务号