首页> 美国政府科技报告 >Effect of Alloying Elements on Tempered Martensite Embrittlement and Fracture Toughness of Low Alloy High Strength Steels

【24h】

Effect of Alloying Elements on Tempered Martensite Embrittlement and Fracture Toughness of Low Alloy High Strength Steels

机译：合金元素对低合金高强度钢回火马氏体脆性和断裂韧性的影响

获取原文

页面导航

摘要
著录项
相似文献
相关主题

摘要

A study was performed on the influence of various elements on the notch bend fracture toughness at 75F and -100F of .35%C, 3Ni-Cr-Mo-V martensitic steels tempered between 400 and 800F. The elements examined included C, Mn, Si, Cr, Ni, Mo, Co, V and Al. The overall variation in room temperature yield and tensile strengths for twenty-four steels was 155-230 ksi yield strength and 188-288 ksi tensile strength. (Author)

著录项

作者
Vishnevsky, C.;
展开▼
作者单位

展开▼
年度 1971
页码 p.1-87
总页数 87
原文格式 PDF
正文语种 eng
中图分类
关键词
Steel ; Notch toughness ; Martensite ; Tensile properties ; Fracture(Mechanics) ; Embrittlement;

机译：钢;缺口韧性;马氏体;拉伸性能;断裂（力学）;脆化;

相似文献

外文文献
中文文献
专利

1. Cleavage fracture toughness of tempered martensitic Ni-Cr-Mo low alloy steel with different martensite fraction [J] . Ki-Hyoung Lee, Sang-Gyu Park, Min-Chul Kim, Materials Science and Engineering . 2012,第Feba1期

机译：不同马氏体分数的回火马氏体Ni-Cr-Mo低合金钢的劈裂断裂韧性
2. Effects of Short-Time Tempering on Impact Toughness, Strength, and Phase Evolution of 4340 Steel Within the Tempered Martensite Embrittlement Regime [J] . Euser V. K., Williamson D. L., Clarke K. D., Metallurgical and Materials Transactions, A. Physical Metallurgy and Materials Science . 2019,第8期

机译：短时间回火对钢制马氏体脆化制度内4340钢的冲击韧性，强度和相位演化的影响
3. Fracture toughness behavior of low-C medium-Mn high-strength steel with submicron-scale laminated microstructure of tempered martensite and reversed austenite [J] . Qi Xiangyu, Du Linxiu, Dong Ying, Journal of Materials Science . 2019,第18期

机译：低C型中MN高强度钢与亚微米级层叠微观结构的裂缝韧性行为及逆转奥氏体
4. Hydrogen Embrittlement Resistances of Alloying Elements Adding Ultrahigh-Strength Low-Alloy TRIP-Aided Steels [C] . Tomohiko HOJO, Junya KOBAYASHI, Koh-ichi SUGIMOTO AIST steel properties amp; applications conference proceedings : Combined with MSamp;T' 12 materials science and technology 2012 conference amp; exhibition . 2012

机译：添加超高强度低合金TRIP辅助钢的合金元素的耐氢脆性
5. Fracture toughness improvement of lower bainite in ultra high-strength low-alloy steels. [D] . Fang, Lu. 1994

机译：超高强度低合金钢中下部贝氏体的断裂韧性提高。
6. Quantum-mechanical analysis of effect of alloying elements on ε-martensite start temperature of steels [O] . J. H. Jang, J. Moon, H.-Y. Ha, -1

机译：合金元素对钢的ε-马氏体起始温度影响的量子力学分析
7. Effects of Alloying Elements, Microstructure and Applied Stress on Amount of Saturated Temper Embrittlement and Embrittling Rate in Low Alloy Steels [O] . Masaaki KATSUMATA 1993

机译：合金元素，微观结构和施加应力对低合金钢饱和燃烧脆性施加率的影响

Effect of Alloying Elements on Tempered Martensite Embrittlement and Fracture Toughness of Low Alloy High Strength Steels

摘要

著录项

相似文献

相关主题

期刊订阅