• 主题
高级搜索  >
历史搜索 清空历史
首页> 美国政府科技报告 >Laser Based Method of Evaluating the Behavior of Surfaces and Surface Treatmentsat Transient High Temperatures and Pressures
【24h】

Laser Based Method of Evaluating the Behavior of Surfaces and Surface Treatmentsat Transient High Temperatures and Pressures

机译：基于激光的瞬态高温和压力下表面和表面处理性能评估方法

获取原文
页面导航
  • 摘要
  • 著录项
  • 相似文献
  • 相关主题

摘要

A set of experiments were performed in order to test the ability of a laser basedsystem to simulate the chemical and thermal effects inside a gun barrel. It is expected that a laser based system would be a relatively inexpensive method for testing various materials and coatings for eventual gun barrel use, and to the present time, there are no publicly documented systems capable of such testing. An extensive literature review revealed that simulation of the mechanical effects would not be possible under the scope of this project, but thermal and chemical simulations could be done. A chamber was constructed to be used for both laser weld overlaying in an inert atmosphere, and for the simulations. Laser melting of titanium indicated that the chamber could provide an inert atmosphere in which no visual contamination of the titanium occurred. Parameters were developed to weld overlay titanium on AISI 4340 using 0.25 mm of preplaced powder, 1 ms pulses at a frequency of 50 Hz, and energy of 7.5 J/pulse, and a speed of 2.1 mm/s. This coating was then used as an interlayer for weld overlaying a 90tantaium-10tungsten alloy. Since titanium has a melting temperature close to the alloy steel, it was conjectured (correctly) that it could be more easily laser weld overlayed that the high melting temperature tantalum-tungsten alloy. Since Ta-Ti form a solid solution, rather than intermetallics formed by Ta-Fe, this was the

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱：kefu@zhangqiaokeyan.com

京公网安备：11010802029741号 ICP备案号：京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有

  • 客服微信

  • 服务号