首页> 美国政府科技报告 >Effect of P Implantation on the Corrosion Behavior of Fe-Cr Alloys
【24h】

Effect of P Implantation on the Corrosion Behavior of Fe-Cr Alloys

机译:p注入对Fe-Cr合金腐蚀行为的影响

获取原文

摘要

We are using ion implantation to study the corrosion/passivation behavior of glassy metals. The implantation process allows us to alter both the structure and composition of the surface. We are investigating P implantation (100 keV) into Fe-Cr alloys at fluences ranging from 2.3 x 10 sup 16 to 2.5 x 10 sup 17 P/cm sup 2 , which induces a crystalline to amorphous structural transition. We are studying the passivation of implanted and unimplanted Fe-Cr alloys in 0.1N H sub 2 SO sub 4 with small (0 to 500 ppm) additions of NaCl. At low Cr (6 at. %) concentrations, P implantation improves passivity at applied passive potentials in the Cl-free electrolyte, but it induces pitting when chlorides are present. The improvement in passivity is manifested as an increase in the passivation rate and an increase in the quality of the film, which resists breakdown by Cl ions if they are added after the equilibrium passive film is established. At high Cr concentrations (18 at. %) there is little benefit of implanting P because the base alloy is able to form a protective film by virtue of the high Cr content. At intermediate Cr concentrations, P implantation to produce an amorphous surface results in a decrease in current density of four orders of magnitude. For an Fe-10Cr alloy, increasing the P concentration causes a progressive change in corrosion morphology from general attack, through pitting, to passivation. During general attack the corrosion film is unprotective and permits uniform corrosion. In the P range where pitting is observed, a three-dimensional oxide film is present that thickens when passivity is observed. 4 refs., 7 figs. (ERA citation 13:022023)

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号