• 主题
高级搜索  >
历史搜索 清空历史
首页> 美国政府科技报告 >Determining Light Intensity for Use with Intermittent or Rotating Prism Cameras Utilizing a Cinematographic Light-Intensity Translator
【24h】

Determining Light Intensity for Use with Intermittent or Rotating Prism Cameras Utilizing a Cinematographic Light-Intensity Translator

机译：利用电影光强度转换器确定间歇或旋转棱镜相机使用的光强度

获取原文
页面导航
  • 摘要
  • 著录项
  • 相似文献
  • 相关主题

摘要

A problem at test ranges is the acquisition of valid light intensity measurements at remote camera tracking or fixed camera sites. After all instrumentation is set up and ready to go, one of the last things to be done is to determine what f/stops and shutter settings should be used. Known factors always exist, such as type of camera (intermittent or rotating prism), and type of film in use. Assuming the operator has no automatic exposure control, he now has to measure the ambient light. Keep in mind that not all personnel who track or set-up cameras are professional photographers. The operator may use his light meter to take a reading, or it may have been forgotten, misplaced, or dropped, out of calibration, or have weak or no batteries. Or worse, he may use the light meter incorrectly. Use of the Cinematographic Light Intensity Translator eliminates the inconsistencies of range light measurements. The Range Camera Controller (coordinator) has the light measurement console at one central location with a primary sensor and remote sensors located as needed. By rotating a thumbwheel, the controller can select the output of a specific sensor at any given time. By looking at the CRT display, he can give any range camera operator the specific lens setting. Prior to the test, the controller has entered all known camera factors for up to fifty functional stations into the minicomputer using the alpha/numerical switch matrix on the controller's console. The remote sensors, usually placed near the impact target or near ground zero, continuously generate and transmit the EV. All settings are given to the camera operators via RF radio net. At Tonopah Test Range, I have sent out changes within 90 seconds of drop or firing time without interrupting the test. The CRT also displays whether the film from each camera location needs to be under- or force-processed. (ERA citation 07:054951)

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱：kefu@zhangqiaokeyan.com

京公网安备：11010802029741号 ICP备案号：京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有

  • 客服微信

  • 服务号