首页> 美国政府科技报告 >Laser Diagnostic Development and Measurement and Modeling of Turbulent Flowfields of Jets and Wakes. Part 1. Two-Dimensional Laser Doppler Anemometer Studies of Isothermal Flowfield in a Ducted Centerbody Combustor
【24h】

Laser Diagnostic Development and Measurement and Modeling of Turbulent Flowfields of Jets and Wakes. Part 1. Two-Dimensional Laser Doppler Anemometer Studies of Isothermal Flowfield in a Ducted Centerbody Combustor

机译:喷射和尾流湍流流场的激光诊断开发与测量与建模。第一部分二维激光多普勒风速仪研究管道中心体燃烧室等温流场

获取原文

摘要

A two-dimensional laser Doppler anemometer was designed to take measurements in a ducted coaxial flow system having a centerbody separating the jets. The measurements, made in isothermal flow, can be categorized as: central jet only (C02); annular jet only (air); and, combined central and annular jet flow. Radial profiles of the axial and radial/azimuthal velocity were obtained. The central jet only condition approximates a free jet since the central jet diameter is much smaller than the centerbody or duct diameter (1:29.3: 53.2). Measurements of the jet development (diameter, turbulence intensity, etc.) were compared with previous free jet studies. In a study of the isotropy of the turbulent fluctuations it was determined that fully developed turbulent flow begins further downstream than anticipated. Velocity profiles were combined with gas sampling measurements to ascertain jet entrainment. Results show a linear growth of the entrained mass starting at the entrance plane. Downstream (20 diameters) the rate of growth increases to match past studies in that region. The annular jet flow creates a recirculation vortex in the wake of the centerbody. The flowfield was mapped and the streamlines describing the flow were obtained throughout the recirculating flow and further downstream.

著录项

相似文献

  • 外文文献
  • 中文文献
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号