首页> 美国政府科技报告 >Fix It First: Utilizing the Seismic Property Analyzer and MMLS to Develop Guidelines for the Use of Polymer Modified Thin Lift HMA vs. Surface Treatments.
【24h】

Fix It First: Utilizing the Seismic Property Analyzer and MMLS to Develop Guidelines for the Use of Polymer Modified Thin Lift HMA vs. Surface Treatments.

机译:首先修复:利用抗震性能分析仪和mmLs制定聚合物改性薄膜Hma与表面处理的使用指南。

获取原文

摘要

The main objective of this study was to develop thin lift overlay mixtures with polymer modified asphalt for use in New England. As part of this research a comprehensive literature review and internet survey was conducted. Moreover, laboratory testing was conducted to develop thin lift Polymer Modified Asphalt (PMA) mixtures in an effort to evaluate their use for New England. It was attempted to use the Model Mobile Load Simulator (MMLS) to investigate the feasibility of using a non-destructive testing (Potable Seismic Property Analyzer) to evaluate the thin lift mixtures. However, after several attempts to compact the asphalt mixtures in the device, achieving target density was not attainable. Accordingly this thin lift mixture testing was replaced by dynamic modulus testing in the Asphalt Mixture Performance Tester and low temperature cracking using the Indirect Tensile Test (IDT). The survey conducted showed the method of selection for either a surface treatment or lift HMA overlay were decision trees, functional classification of the roadway, existing pavement condition, experience and treatment cost. Moreover, the majority of respondents did not have a methodology to select the appropriate time to apply a strategy. Based on the survey, transportation agencies utilized PMA to reduced cracking, reduce rutting, reduce thermal cracking, and extended pavement life. No disadvantages of using polymer modified asphalt were noted. Thin lift mixtures were developed with five modified binders and one conventional binder for comparison purposes. The laboratory data indicated that the low temperature performance grade of the binders were warmer than the low temperature cracking of the mixtures predicted using IDT measurements. This indicates that the use of the PMA did not increase the low temperature susceptibility of the mixtures tested. Therefore, PMA could be utilized for thin lift mixtures placed in the New England region.

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号