• 主题
高级搜索  >
历史搜索 清空历史
首页> 美国政府科技报告 >Evaluating the Effectivenss of Hot-Poured Crack Surfacing Material
【24h】

Evaluating the Effectivenss of Hot-Poured Crack Surfacing Material

机译：评价热浇裂纹堆焊材料的有效性

获取原文
页面导航
  • 摘要
  • 著录项
  • 相似文献
  • 相关主题

摘要

This research project evaluates the effectiveness of hot-poured crack surfacing material and its ability to seal asphaltic cracks. The term 'crack surfacing' is used to describe the rigidity of the material and to distinguish it from crack sealants. The University of Wyoming, in cooperation with the Wyoming DOT, conducted field and laboratory evaluations to determine the in-situ performance, temperature and load characteristics, and rutting susceptibility of three selected manufacturer's products: Deery American Corporation's Level & Go and Recessed Repair Mastic, and Crafco Incorporated's PolyPatch. The field evaluation was accomplished at selected test sections of Wyoming Route 93, US Route 26, and Interstate 25. These evaluations identified the modes of failure, superficial distresses, and percent effectiveness. The laboratory evaluation included performance of the Thermal Stress Restrained Specimen Test (TSRST) and the Georgia Loaded Wheel Tester (GLWT). The TSRST was used to evaluate the cold temperature bonding characteristics, in particular the fracture temperature, and the load capacity of the crack surfacing materials. To represent field conditions, the materials were configured as flush, uniform overband, tapered overband, and mill & fill. The GLWT was utilized to evaluate the rutting susceptibility of the materials in use. The findings of this research indicate that the Crafco PolyPatch and the tapered overband configuration were the best performers. Based on the results, it is recommended that the PolyPatch material be used with the tapered overband configuration for cold climate applications.

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱：kefu@zhangqiaokeyan.com

京公网安备：11010802029741号 ICP备案号：京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有

  • 客服微信

  • 服务号