首页> 美国政府科技报告 >Nonlinear Finite Element Simulation of the Test Procedure for Stiffened PanelsUnder Combined Lateral and In-Plane Loads

【24h】

Nonlinear Finite Element Simulation of the Test Procedure for Stiffened PanelsUnder Combined Lateral and In-Plane Loads

机译：加筋面板在平面和面内荷载作用下的非线性有限元模拟

获取原文

页面导航

摘要
著录项
相似文献
相关主题

摘要

Buckling of stiffened plates is one of the most important considerations in shipstructural design. DREA conducted a joint test project with the U.S. Interagency Ship Structural Committee (SSC) earlier this year. A total of twelve stiffened panels, with or without damage, having dimensions approximately equal to a typical stiffened panel at the strength deck of the Canadian Patrol Frigate (CPF), were tested at C-FER (Centre for Engineering Research Inc., Edmonton). DREA lead this project on behalf of SSC and conducted the non-linear finite element analysis to predict the response and the collapse load of the specimens. Because of the complexity of the numerical simulation and the completely different behavior between damaged and undamaged specimens, this memorandum

著录项

作者
Hu, T. S. Z.;
展开▼
作者单位

展开▼
年度 1997
页码
总页数 48
原文格式 PDF
正文语种 eng
中图分类工业技术;
关键词
Ships; Naval architecture; Buckling; Test methods; Finite element analysis; Stiffening; Reinforcement(Structures); Lateral pressure; Loads(Forces); Ship hulls;

机译：船舶;船舶结构;屈曲;试验方法;有限元分析;加固;钢筋（结构）;侧向压力;载荷（力）;船体;

相似文献

外文文献
中文文献
专利

1. Nonlinear finite element method models for ultimate strength analysis of steel stiffened-plate structures under combined biaxial compression and lateral pressure actions-Part Ⅱ: Stiffened panels [J] . Jeom Kee Paik, Jung Kwan Seo Thin-Walled Structures . 2009,第8a9期

机译：钢加筋板结构双轴压缩和侧压力作用下极限强度分析的非线性有限元模型-第二部分：加筋板
2. Nonlinear finite element method models for ultimate strength analysis of steel stiffened-plate structures under combined biaxial compression and lateral pressure actions-Part Ⅰ: Plate elements [J] . Jeom Kee Paik, Jung Kwan Seo Thin-Walled Structures . 2009,第8a9期

机译：组合双轴压缩和侧压力作用下钢加劲板结构极限强度的非线性有限元模型-第一部分：板单元
3. Combined stochastic lateral and in-plane loading of a stiffened ship panel leading to collapse [J] . Seyffert H. C., Troesch A. W., Collette M. D. Marine Structures . 2019,第SEPa期

机译：加筋的船面板的随机横向和平面载荷组合导致崩溃
4. Simulating static and dynamic lateral load testing of bridge foundations using nonlinear finite element models [C] . S. Chakraborty, D.A. Brown MIT Conference on Computational Fluid and Solid Mechanics Vol.Ⅰ Jun 12-15, 2001 . 2001

机译：使用非线性有限元模型模拟桥梁基础的静态和动态侧向载荷测试
5. Finite element analysis of fixed sandwich panels under combined in-plane and lateral loads. [D] . Luo, Weijiang. 2008

机译：平面和横向组合荷载作用下固定夹芯板的有限元分析。
6. Improved fracture risk assessment based on nonlinear micro-finite element simulations from HRpQCT images at the distal radius [O] . David Christen, L. Joseph Melton III, Alexander Zwahlen, -1

机译：基于远端radius骨HRpQCT图像的非线性微有限元模拟改善了骨折风险评估
7. Survey of Methods of Analysis of the Strength of Stiffened and Unstiffened Plates Subjected to Combined In-Plane and Lateral Loads [O] . UEDA Yukio, RASHED S. M. H., SOSNOWSKI W. 2013

机译：平面和水平荷载共同作用下加劲板和非劲板的强度分析方法综述

Nonlinear Finite Element Simulation of the Test Procedure for Stiffened PanelsUnder Combined Lateral and In-Plane Loads

摘要

著录项

相似文献

相关主题

期刊订阅