• 主题
高级搜索  >
历史搜索 清空历史
首页> 美国政府科技报告 >In-Depth Survey Report: Control Technology for Autobody Repair and Painting Shopsat Cincinnati Collision Autobody Shop, Blue Ash, Ohio, July 27-30, 1992
【24h】

In-Depth Survey Report: Control Technology for Autobody Repair and Painting Shopsat Cincinnati Collision Autobody Shop, Blue Ash, Ohio, July 27-30, 1992

机译：深入调查报告：车身修理和涂装车间控制技术，辛辛那提碰撞车间，俄亥俄州蓝灰，1992年7月27日至30日

获取原文
页面导航
  • 摘要
  • 著录项
  • 相似文献
  • 相关主题

摘要

A study was made to document and evaluate effective techniques for the control ofpotential health hazards at the Cincinnati Collision Autobody Shop, (SIC-7532), Blue Ash, Ohio. The facility employed five body repair technicians, three painters, and two general shop personnel along with three office workers. Between 25 and 30 vehicles were painted per week. The down draft spray painting booth and ventilated sanders in use appeared to effectively control air contaminant exposures. Air velocities around the vehicle appeared to be high enough to control most overspray. When the worker aimed the spray gun into the oncoming airflow from the booth, some overspray could be transported back into the breathing zone of the worker. If the vehicle preparation station was used in the exhaust mode for small painting jobs, the air velocities were too low to provide effective air contaminant control. Use of respirators at this shop was inadequate. There appeared to be a general lack of understanding of what proper respirator usage entails. The author recommended that the OSHA respiratory standard be implemented.

著录项

相似文献

  • 外文文献
获取原文

客服邮箱：kefu@zhangqiaokeyan.com

京公网安备：11010802029741号 ICP备案号：京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有

  • 客服微信

  • 服务号